Initially resetting device address was done in dwc2_hsotg_irq() interrupt handler. However, when core is hibernated USB RESET is not handled in dwc2_hsotg_irq() handler, instead USB RESET interrupt is handled in dwc2_handle_gpwrdn_intr() handler. - Added reset device address to zero when core exits from gadget hibernation. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@xxxxxxxxxxxx> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx> --- drivers/usb/dwc2/gadget.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2f50f3e62caa..e6bb1bdb2760 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -5305,6 +5305,10 @@ int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg, dwc2_writel(hsotg, dr->dcfg, DCFG); dwc2_writel(hsotg, dr->dctl, DCTL); + /* On USB Reset, reset device address to zero */ + if (reset) + dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK); + /* De-assert Wakeup Logic */ gpwrdn = dwc2_readl(hsotg, GPWRDN); gpwrdn &= ~GPWRDN_PMUACTV; -- 2.25.1
