Avoiding phy powerdown in host mode when wakeup capable devices are connected, so that it can be wake up by devices. Set GENPD_FLAG_ACTIVE_WAKEUP flag to keep usb30_prim gdsc active when wakeup capable devices are connected to the host. Changes in v6: Addressed comments in host.c and core.c Separated the patches in dwc3-qcom.c to make it simple. Dropped wakeup-source change as it is not related to this series. Changes in v5: Added phy_power_off flag to check presence of wakeup capable devices. Dropped patch[v4,4/5] as it is present linux-next. Addressed comments in host.c and dwc3-qcom.c. Changes in v4: Addressed Matthias comments raised in v3. Changes in v3: Removed need_phy_for_wakeup flag and by default avoiding phy powerdown. Addressed Matthias comments and added entry for DEV_SUPERSPEED. Added suspend_quirk in dwc3 host and moved the dwc3_set_phy_speed_flags. Added wakeup-source dt entry and reading in dwc-qcom.c glue driver. Changes in v2: Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and setting in usb dwc3 driver. Separated the core patch and glue driver patch. Made need_phy_for_wakeup flag part of dwc structure and hs_phy_flags as unsgined int. Adrressed the comment on device_init_wakeup call. Corrected offset for reading portsc register. Added pacth to support wakeup in xo shutdown case. Sandeep Maheswaram (5): usb: dwc3: host: Add suspend_quirk for dwc3 host usb: dwc3: core: Host wake up support from system suspend usb: dwc3: qcom: Add helper functions to enable,disable wake irqs usb: dwc3: qcom: Configure wakeup interrupts during suspend usb: dwc3: qcom: Set genpd active wakeup flag for usb gdsc drivers/usb/dwc3/core.c | 7 ++-- drivers/usb/dwc3/core.h | 3 ++ drivers/usb/dwc3/dwc3-qcom.c | 85 ++++++++++++++++++++++++++++---------------- drivers/usb/dwc3/host.c | 59 ++++++++++++++++++++++++++++++ 4 files changed, 122 insertions(+), 32 deletions(-) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation