PM will take care of the status of child device, so no need
check each port anymore.
Suggested-by: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/host/xhci-mtk.c | 43 ++-----------------------------------
1 file changed, 2 insertions(+), 41 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index d4c455eecb8d..1fdeb315a124 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -654,42 +654,6 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
return ret;
}
-static int check_rhub_status(struct xhci_hcd *xhci, struct xhci_hub *rhub)
-{
- u32 suspended_ports;
- u32 status;
- int num_ports;
- int i;
-
- num_ports = rhub->num_ports;
- suspended_ports = rhub->bus_state.suspended_ports;
- for (i = 0; i < num_ports; i++) {
- if (!(suspended_ports & BIT(i))) {
- status = readl(rhub->ports[i]->addr);
- if (status & PORT_CONNECT)
- return -EBUSY;
- }
- }
-
- return 0;
-}
-
-/*
- * check the bus whether it could suspend or not
- * the bus will suspend if the downstream ports are already suspended,
- * or no devices connected.
- */
-static int check_bus_status(struct xhci_hcd *xhci)
-{
- int ret;
-
- ret = check_rhub_status(xhci, &xhci->usb3_rhub);
- if (ret)
- return ret;
-
- return check_rhub_status(xhci, &xhci->usb2_rhub);
-}
-
static int __maybe_unused xhci_mtk_runtime_suspend(struct device *dev)
{
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
@@ -699,11 +663,8 @@ static int __maybe_unused xhci_mtk_runtime_suspend(struct device *dev)
if (xhci->xhc_state)
return -ESHUTDOWN;
- if (device_may_wakeup(dev)) {
- ret = check_bus_status(xhci);
- if (!ret)
- ret = xhci_mtk_suspend(dev);
- }
+ if (device_may_wakeup(dev))
+ ret = xhci_mtk_suspend(dev);
/* -EBUSY: let PM automatically reschedule another autosuspend */
return ret ? -EBUSY : 0;
--
2.18.0
