Hi Greg, On 4/13/2021 11:35, Artur Petrosyan wrote: > This patch set adds clock gating power saving support for > dwc2 core. > It adds support for the following cases described by programming guide. > 1. Enter to clock gating from USB_SUSPEND interrupt. > 2. Clock gating entering flow by system suspend. > 3. Clock gating exiting flow by system resume. > 4. Exit clock gating from wakeup interrupt. > 5. Exit clock gating from session request interrupt. > 6. Exit clock gating when port reset is asserted. > > Additional cases to exit form clock gating were needed which are not > described in clock gating programming guide. > 1. Added clock gating exit flow before removing driver > 2. Exit clock gating in urb enqueue. > > It updates the implementation of dwc2 entering and exiting clock > gating when a port is suspended or resumed. > > The patch set also adds the implementation of function handlers > for entering and exiting host or device clock gating. > > NOTE: This is the third patch set in the power saving mode fixes > series. > This patch set is part of multiple series and is continuation > of the "usb: dwc2: Fix and improve power saving modes" patch set. > (Patch set link: https://marc.info/?l=linux-usb&m=160379622403975&w=2). > The patches that were included in the "usb: dwc2: > Fix and improve power saving modes" which was submitted > earlier was too large and needed to be split up into > smaller patch sets. > > Changes since V1: > Re sending the patch set as v1 because vger.kernel.org rejected > the cover letter. With error code "550 5.7.1 Content-Policy" > No changes in the patches or the source code. > > > Artur Petrosyan (12): > usb: dwc2: Add device clock gating support functions > usb: dwc2: Add host clock gating support functions > usb: dwc2: Allow entering clock gating from USB_SUSPEND interrupt > usb: dwc2: Add exit clock gating from wakeup interrupt > usb: dwc2: Add exit clock gating from session request interrupt > usb: dwc2: Add exit clock gating when port reset is asserted > usb: dwc2: Update enter clock gating when port is suspended > usb: dwc2: Update exit clock gating when port is resumed > usb: dwc2: Allow exit clock gating in urb enqueue > usb: dwc2: Add clock gating entering flow by system suspend > usb: dwc2: Add clock gating exiting flow by system resume > usb: dwc2: Add exit clock gating before removing driver > > drivers/usb/dwc2/core.h | 15 ++- > drivers/usb/dwc2/core_intr.c | 62 ++++++++---- > drivers/usb/dwc2/gadget.c | 71 ++++++++++++++ > drivers/usb/dwc2/hcd.c | 177 +++++++++++++++++++++++++++-------- > drivers/usb/dwc2/platform.c | 9 ++ > 5 files changed, 272 insertions(+), 62 deletions(-) > > > base-commit: 9bc46a12c53d8268392774172742aa9e5dd6953d > This cover letter for the clock gating patches is being rejected by "vger.kernel.org". I have tried to send one more time as v2 but again it is rejected. The error message is "vger.kernel.org Remote Server returned '554 5.7.1 <vger.kernel.org #5.7.1 smtp; 550 5.7.1 Content-Policy accept-into-freezer-1" Could you please suggest any solution to this? Regards, Artur
