Currently the controller handles single stream only. So, Ignore Packet Pending bit for stream selection and don't search for another stream if the host sends Data Packet with PP=0 (for OUT direction) or ACK with NumP=0 and PP=0 (for IN direction). This slightly improves the stream performance. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> --- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/gadget.c | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 6e9abfbccaa6..5a9b56b744c5 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -403,6 +403,7 @@ #define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f) #define DWC3_DCFG_NUMP_MASK (0x1f << DWC3_DCFG_NUMP_SHIFT) #define DWC3_DCFG_LPM_CAP BIT(22) +#define DWC3_DCFG_IGNSTRMPP BIT(23) /* Device Control Register */ #define DWC3_DCTL_RUN_STOP BIT(31) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index e1b04c976da5..ec7aabba962d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2399,6 +2399,17 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_gadget_setup_nump(dwc); + /* + * Currently the controller handles single stream only. So, Ignore + * Packet Pending bit for stream selection and don't search for another + * stream if the host sends Data Packet with PP=0 (for OUT direction) or + * ACK with NumP=0 and PP=0 (for IN direction). This slightly improves + * the stream performance. + */ + reg = dwc3_readl(dwc->regs, DWC3_DCFG); + reg |= DWC3_DCFG_IGNSTRMPP; + dwc3_writel(dwc->regs, DWC3_DCFG, reg); + /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); base-commit: 9bc46a12c53d8268392774172742aa9e5dd6953d -- 2.28.0
