Add two port-command helpers to handle the UART module-id parameter
instead of open coding.
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/ti_usb_3410_5052.c | 95 +++++++++++++--------------
1 file changed, 45 insertions(+), 50 deletions(-)
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 25d5a6e83009..f63ee11f41e8 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -333,10 +333,14 @@ static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
-static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
+static int ti_command_out_sync(struct usb_device *udev, __u8 command,
__u16 moduleid, __u16 value, void *data, int size);
-static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
+static int ti_command_in_sync(struct usb_device *udev, __u8 command,
__u16 moduleid, __u16 value, void *data, int size);
+static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
+ u16 value, void *data, int size);
+static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
+ u16 value, void *data, int size);
static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
unsigned long addr, u8 mask, u8 byte);
@@ -635,10 +639,10 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
struct ti_device *tdev;
struct usb_device *dev;
struct urb *urb;
- int port_number;
int status;
u16 open_settings;
+
open_settings = (TI_PIPE_MODE_CONTINUOUS |
TI_PIPE_TIMEOUT_ENABLE |
(TI_TRANSFER_TIMEOUT << 2));
@@ -650,8 +654,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
if (mutex_lock_interruptible(&tdev->td_open_close_lock))
return -ERESTARTSYS;
- port_number = port->port_number;
-
tport->tp_msr = 0;
tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
@@ -675,31 +677,27 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
if (tty)
ti_set_termios(tty, port, &tty->termios);
- status = ti_command_out_sync(tdev, TI_OPEN_PORT,
- (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
+ status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
if (status) {
dev_err(&port->dev, "%s - cannot send open command, %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_START_PORT,
- (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
+ status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
if (status) {
dev_err(&port->dev, "%s - cannot send start command, %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_PURGE_PORT,
- (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
+ status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_INPUT, NULL, 0);
if (status) {
dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_PURGE_PORT,
- (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
+ status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_OUTPUT, NULL, 0);
if (status) {
dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
__func__, status);
@@ -714,16 +712,14 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
if (tty)
ti_set_termios(tty, port, &tty->termios);
- status = ti_command_out_sync(tdev, TI_OPEN_PORT,
- (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
+ status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
if (status) {
dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
__func__, status);
goto unlink_int_urb;
}
- status = ti_command_out_sync(tdev, TI_START_PORT,
- (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
+ status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
if (status) {
dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
__func__, status);
@@ -764,7 +760,6 @@ static void ti_close(struct usb_serial_port *port)
{
struct ti_device *tdev;
struct ti_port *tport;
- int port_number;
int status;
unsigned long flags;
@@ -780,10 +775,7 @@ static void ti_close(struct usb_serial_port *port)
kfifo_reset_out(&port->write_fifo);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- port_number = port->port_number;
-
- status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
- (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
+ status = ti_port_cmd_out(port, TI_CLOSE_PORT, 0, NULL, 0);
if (status)
dev_err(&port->dev,
"%s - cannot send close port command, %d\n"
@@ -904,7 +896,6 @@ static void ti_set_termios(struct tty_struct *tty,
struct ti_uart_config *config;
int baud;
int status;
- int port_number = port->port_number;
unsigned int mcr;
u16 wbaudrate;
u16 wflags = 0;
@@ -998,12 +989,11 @@ static void ti_set_termios(struct tty_struct *tty,
config->wBaudRate = cpu_to_be16(wbaudrate);
config->wFlags = cpu_to_be16(wflags);
- status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG,
- (__u8)(TI_UART1_PORT + port_number), 0, config,
- sizeof(*config));
+ status = ti_port_cmd_out(port, TI_SET_CONFIG, 0, config,
+ sizeof(*config));
if (status)
dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
- __func__, port_number, status);
+ __func__, port->port_number, status);
/* SET_CONFIG asserts RTS and DTR, reset them correctly */
mcr = tport->tp_shadow_mcr;
@@ -1012,9 +1002,8 @@ static void ti_set_termios(struct tty_struct *tty,
mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
status = ti_set_mcr(tport, mcr);
if (status)
- dev_err(&port->dev,
- "%s - cannot set modem control on port %d, %d\n",
- __func__, port_number, status);
+ dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n",
+ __func__, port->port_number, status);
kfree(config);
}
@@ -1365,9 +1354,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
{
int size, status;
- struct ti_device *tdev = tport->tp_tdev;
struct usb_serial_port *port = tport->tp_port;
- int port_number = port->port_number;
struct ti_port_status *data;
size = sizeof(struct ti_port_status);
@@ -1375,8 +1362,7 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
if (!data)
return -ENOMEM;
- status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
- (__u8)(TI_UART1_PORT+port_number), 0, data, size);
+ status = ti_port_cmd_in(port, TI_GET_PORT_STATUS, 0, data, size);
if (status) {
dev_err(&port->dev,
"%s - get port status command failed, %d\n",
@@ -1473,34 +1459,28 @@ static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
return status;
}
-
-static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
+static int ti_command_out_sync(struct usb_device *udev, __u8 command,
__u16 moduleid, __u16 value, void *data, int size)
{
int status;
- status = usb_control_msg(tdev->td_serial->dev,
- usb_sndctrlpipe(tdev->td_serial->dev, 0), command,
- (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT),
- value, moduleid, data, size, 1000);
-
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), command,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ value, moduleid, data, size, 1000);
if (status < 0)
return status;
return 0;
}
-
-static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
+static int ti_command_in_sync(struct usb_device *udev, __u8 command,
__u16 moduleid, __u16 value, void *data, int size)
{
int status;
- status = usb_control_msg(tdev->td_serial->dev,
- usb_rcvctrlpipe(tdev->td_serial->dev, 0), command,
- (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN),
- value, moduleid, data, size, 1000);
-
+ status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), command,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ value, moduleid, data, size, 1000);
if (status == size)
status = 0;
else if (status >= 0)
@@ -1509,6 +1489,21 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
return status;
}
+static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
+ u16 value, void *data, int size)
+{
+ return ti_command_out_sync(port->serial->dev, command,
+ TI_UART1_PORT + port->port_number,
+ value, data, size);
+}
+
+static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
+ u16 value, void *data, int size)
+{
+ return ti_command_in_sync(port->serial->dev, command,
+ TI_UART1_PORT + port->port_number,
+ value, data, size);
+}
static int ti_write_byte(struct usb_serial_port *port,
struct ti_device *tdev, unsigned long addr,
@@ -1534,8 +1529,8 @@ static int ti_write_byte(struct usb_serial_port *port,
data->bData[0] = mask;
data->bData[1] = byte;
- status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0,
- data, size);
+ status = ti_command_out_sync(port->serial->dev, TI_WRITE_DATA,
+ TI_RAM_PORT, 0, data, size);
if (status < 0)
dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
--
2.26.3
