Re: [PATCH v2 6/6] Documentation: connector: Add slow-charger-loop definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 07, 2021 at 01:07:23PM -0700, Badhri Jagan Sridharan wrote:
> To allow slow charger loops to comply to pSnkStby requirement,
> this patch introduces slow-charger-loop which when set makes
> the port request PD_P_SNK_STDBY_MW upon entering SNK_DISCOVERY
> (instead of 3A or the 1.5A during SNK_DISCOVERY) and the actual
> currrent limit after RX of PD_CTRL_PSRDY for PD link or during
> SNK_READY for non-pd link.

What are 'slow charger loops' and pSnkStby?

'dt-bindings: connector: ...' for the subject. Follow the pattern you 
see with 'git log --oneline' for a directory.

> 
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/connector/usb-connector.yaml       | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> index b6daedd62516..09ad3ad983a6 100644
> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> @@ -197,6 +197,13 @@ properties:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [1, 2, 3]
>  
> +  slow-charger-loop:
> +    description: Allows slow charging loops to comply to pSnkStby. When set makes
> +      the port request pSnkStby(2.5W - 5V@500mA) upon entering SNK_DISCOVERY(instead
> +      of 3A or the 1.5A during SNK_DISCOVERY) and the actual currrent limit after
> +      reception of PS_Ready for PD link or during SNK_READY for non-pd link.
> +    type: boolean
> +
>  required:
>    - compatible
>  
> -- 
> 2.31.1.295.g9ea45b61b8-goog
> 



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux