Re: [PATCH v1 2/6] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

Moved to kerneldoc header in V2.

Thanks,
Badhri

On Wed, Apr 7, 2021 at 9:07 AM Adam Thomson
<Adam.Thomson.Opensource@xxxxxxxxxxx> wrote:
>
> On 06 April 2021 02:37, Badhri Jagan Sridharan wrote:
>
> > tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt,
> > port->pps_data.max_volt, port->pps_data.max_curr even before
> > port partner accepts the requests. This leaves incorrect values
> > in current_limit and supply_voltage that get exported by
> > "tcpm-source-psy-". Solving this problem by caching the request
> > values in req_min_volt, req_max_volt, req_max_curr, req_out_volt,
> > req_op_curr. min_volt, max_volt, max_curr gets updated once the
> > partner accepts the request. current_limit, supply_voltage gets updated
> > once local port's tcpm enters SNK_TRANSITION_SINK when the accepted
> > current_limit and supply_voltage is enforced.
> >
> > Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through
> > power_supply")
> > Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
> > ---
>
> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
>
> >  drivers/usb/typec/tcpm/tcpm.c | 84 ++++++++++++++++++++---------------
> >  1 file changed, 49 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> > index 03eca5061132..d43774cc2ccf 100644
> > --- a/drivers/usb/typec/tcpm/tcpm.c
> > +++ b/drivers/usb/typec/tcpm/tcpm.c
> > @@ -269,11 +269,22 @@ struct pd_mode_data {
> >  };
> >
> >  struct pd_pps_data {
> > +     /* Actual min voltage at the local port */
> >       u32 min_volt;
> > +     /* Requested min voltage to the port partner */
> > +     u32 req_min_volt;
> > +     /* Actual max voltage at the local port */
> >       u32 max_volt;
> > +     /* Requested max voltage to the port partner */
> > +     u32 req_max_volt;
> > +     /* Actual max current at the local port */
> >       u32 max_curr;
> > -     u32 out_volt;
> > -     u32 op_curr;
> > +     /* Requested max current of the port partner */
> > +     u32 req_max_curr;
> > +     /* Requested output voltage to the port partner */
> > +     u32 req_out_volt;
> > +     /* Requested operating current to the port partner */
> > +     u32 req_op_curr;
> >       bool supported;
> >       bool active;
> >  };
> > @@ -2498,8 +2509,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port
> > *port,
> >                       break;
> >               case SNK_NEGOTIATE_PPS_CAPABILITIES:
> >                       /* Revert data back from any requested PPS updates */
> > -                     port->pps_data.out_volt = port->supply_voltage;
> > -                     port->pps_data.op_curr = port->current_limit;
> > +                     port->pps_data.req_out_volt = port->supply_voltage;
> > +                     port->pps_data.req_op_curr = port->current_limit;
> >                       port->pps_status = (type == PD_CTRL_WAIT ?
> >                                           -EAGAIN : -EOPNOTSUPP);
> >
> > @@ -2548,8 +2559,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port
> > *port,
> >                       break;
> >               case SNK_NEGOTIATE_PPS_CAPABILITIES:
> >                       port->pps_data.active = true;
> > -                     port->req_supply_voltage = port->pps_data.out_volt;
> > -                     port->req_current_limit = port->pps_data.op_curr;
> > +                     port->pps_data.min_volt = port-
> > >pps_data.req_min_volt;
> > +                     port->pps_data.max_volt = port-
> > >pps_data.req_max_volt;
> > +                     port->pps_data.max_curr = port-
> > >pps_data.req_max_curr;
> > +                     port->req_supply_voltage = port-
> > >pps_data.req_out_volt;
> > +                     port->req_current_limit = port->pps_data.req_op_curr;
> >                       tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
> >                       break;
> >               case SOFT_RESET_SEND:
> > @@ -3108,16 +3122,16 @@ static unsigned int tcpm_pd_select_pps_apdo(struct
> > tcpm_port *port)
> >               src = port->source_caps[src_pdo];
> >               snk = port->snk_pdo[snk_pdo];
> >
> > -             port->pps_data.min_volt =
> > max(pdo_pps_apdo_min_voltage(src),
> > -                                           pdo_pps_apdo_min_voltage(snk));
> > -             port->pps_data.max_volt =
> > min(pdo_pps_apdo_max_voltage(src),
> > -                                           pdo_pps_apdo_max_voltage(snk));
> > -             port->pps_data.max_curr = min_pps_apdo_current(src, snk);
> > -             port->pps_data.out_volt = min(port->pps_data.max_volt,
> > -                                           max(port->pps_data.min_volt,
> > -                                               port->pps_data.out_volt));
> > -             port->pps_data.op_curr = min(port->pps_data.max_curr,
> > -                                          port->pps_data.op_curr);
> > +             port->pps_data.req_min_volt =
> > max(pdo_pps_apdo_min_voltage(src),
> > +
> > pdo_pps_apdo_min_voltage(snk));
> > +             port->pps_data.req_max_volt =
> > min(pdo_pps_apdo_max_voltage(src),
> > +
> > pdo_pps_apdo_max_voltage(snk));
> > +             port->pps_data.req_max_curr = min_pps_apdo_current(src,
> > snk);
> > +             port->pps_data.req_out_volt = min(port->pps_data.max_volt,
> > +                                               max(port->pps_data.min_volt,
> > +                                                   port-
> > >pps_data.req_out_volt));
> > +             port->pps_data.req_op_curr = min(port->pps_data.max_curr,
> > +                                              port->pps_data.req_op_curr);
> >               power_supply_changed(port->psy);
> >       }
> >
> > @@ -3245,10 +3259,10 @@ static int tcpm_pd_build_pps_request(struct
> > tcpm_port *port, u32 *rdo)
> >                       tcpm_log(port, "Invalid APDO selected!");
> >                       return -EINVAL;
> >               }
> > -             max_mv = port->pps_data.max_volt;
> > -             max_ma = port->pps_data.max_curr;
> > -             out_mv = port->pps_data.out_volt;
> > -             op_ma = port->pps_data.op_curr;
> > +             max_mv = port->pps_data.req_max_volt;
> > +             max_ma = port->pps_data.req_max_curr;
> > +             out_mv = port->pps_data.req_out_volt;
> > +             op_ma = port->pps_data.req_op_curr;
> >               break;
> >       default:
> >               tcpm_log(port, "Invalid PDO selected!");
> > @@ -3295,8 +3309,8 @@ static int tcpm_pd_build_pps_request(struct tcpm_port
> > *port, u32 *rdo)
> >       tcpm_log(port, "Requesting APDO %d: %u mV, %u mA",
> >                src_pdo_index, out_mv, op_ma);
> >
> > -     port->pps_data.op_curr = op_ma;
> > -     port->pps_data.out_volt = out_mv;
> > +     port->pps_data.req_op_curr = op_ma;
> > +     port->pps_data.req_out_volt = out_mv;
> >
> >       return 0;
> >  }
> > @@ -5429,7 +5443,7 @@ static int tcpm_try_role(struct typec_port *p, int role)
> >       return ret;
> >  }
> >
> > -static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr)
> > +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr)
> >  {
> >       unsigned int target_mw;
> >       int ret;
> > @@ -5447,12 +5461,12 @@ static int tcpm_pps_set_op_curr(struct tcpm_port
> > *port, u16 op_curr)
> >               goto port_unlock;
> >       }
> >
> > -     if (op_curr > port->pps_data.max_curr) {
> > +     if (req_op_curr > port->pps_data.max_curr) {
> >               ret = -EINVAL;
> >               goto port_unlock;
> >       }
> >
> > -     target_mw = (op_curr * port->pps_data.out_volt) / 1000;
> > +     target_mw = (req_op_curr * port->supply_voltage) / 1000;
> >       if (target_mw < port->operating_snk_mw) {
> >               ret = -EINVAL;
> >               goto port_unlock;
> > @@ -5466,10 +5480,10 @@ static int tcpm_pps_set_op_curr(struct tcpm_port
> > *port, u16 op_curr)
> >       }
> >
> >       /* Round down operating current to align with PPS valid steps */
> > -     op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP);
> > +     req_op_curr = req_op_curr - (req_op_curr %
> > RDO_PROG_CURR_MA_STEP);
> >
> >       reinit_completion(&port->pps_complete);
> > -     port->pps_data.op_curr = op_curr;
> > +     port->pps_data.req_op_curr = req_op_curr;
> >       port->pps_status = 0;
> >       port->pps_pending = true;
> >       mutex_unlock(&port->lock);
> > @@ -5490,7 +5504,7 @@ static int tcpm_pps_set_op_curr(struct tcpm_port
> > *port, u16 op_curr)
> >       return ret;
> >  }
> >
> > -static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt)
> > +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt)
> >  {
> >       unsigned int target_mw;
> >       int ret;
> > @@ -5508,13 +5522,13 @@ static int tcpm_pps_set_out_volt(struct tcpm_port
> > *port, u16 out_volt)
> >               goto port_unlock;
> >       }
> >
> > -     if (out_volt < port->pps_data.min_volt ||
> > -         out_volt > port->pps_data.max_volt) {
> > +     if (req_out_volt < port->pps_data.min_volt ||
> > +         req_out_volt > port->pps_data.max_volt) {
> >               ret = -EINVAL;
> >               goto port_unlock;
> >       }
> >
> > -     target_mw = (port->pps_data.op_curr * out_volt) / 1000;
> > +     target_mw = (port->current_limit * req_out_volt) / 1000;
> >       if (target_mw < port->operating_snk_mw) {
> >               ret = -EINVAL;
> >               goto port_unlock;
> > @@ -5528,10 +5542,10 @@ static int tcpm_pps_set_out_volt(struct tcpm_port
> > *port, u16 out_volt)
> >       }
> >
> >       /* Round down output voltage to align with PPS valid steps */
> > -     out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP);
> > +     req_out_volt = req_out_volt - (req_out_volt %
> > RDO_PROG_VOLT_MV_STEP);
> >
> >       reinit_completion(&port->pps_complete);
> > -     port->pps_data.out_volt = out_volt;
> > +     port->pps_data.req_out_volt = req_out_volt;
> >       port->pps_status = 0;
> >       port->pps_pending = true;
> >       mutex_unlock(&port->lock);
> > @@ -5589,8 +5603,8 @@ static int tcpm_pps_activate(struct tcpm_port *port,
> > bool activate)
> >
> >       /* Trigger PPS request or move back to standard PDO contract */
> >       if (activate) {
> > -             port->pps_data.out_volt = port->supply_voltage;
> > -             port->pps_data.op_curr = port->current_limit;
> > +             port->pps_data.req_out_volt = port->supply_voltage;
> > +             port->pps_data.req_op_curr = port->current_limit;
> >       }
> >       mutex_unlock(&port->lock);
> >
> > --
> > 2.31.0.208.g409f899ff0-goog
>



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux