[PATCH 3/4] xhci: fix potential array out of bounds with several interrupters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Max Interrupters supported by the controller is given in a 10bit
wide bitfield, but the driver uses a fixed 128 size array to index these
interrupters.

Klockwork reports a possible array out of bounds case which in theory
is possible. In practice this hasn't been hit as a common number of Max
Interrupters for new controllers is 8, not even close to 128.

This needs to be fixed anyway

Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
 drivers/usb/host/xhci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f9614716ecd7..ca9385d22f68 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -227,6 +227,7 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
 	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
 	int err, i;
 	u64 val;
+	u32 intrs;
 
 	/*
 	 * Some Renesas controllers get into a weird state if they are
@@ -265,7 +266,10 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
 	if (upper_32_bits(val))
 		xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
 
-	for (i = 0; i < HCS_MAX_INTRS(xhci->hcs_params1); i++) {
+	intrs = min_t(u32, HCS_MAX_INTRS(xhci->hcs_params1),
+		      ARRAY_SIZE(xhci->run_regs->ir_set));
+
+	for (i = 0; i < intrs; i++) {
 		struct xhci_intr_reg __iomem *ir;
 
 		ir = &xhci->run_regs->ir_set[i];
-- 
2.25.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux