On Tue, Apr 06, 2021 at 11:02:38AM +0700, Pho Tran wrote: > From: Pho Tran <pho.tran@xxxxxxxxxx> > > Similar to other CP210x devices, GPIO interfaces (gpiochip) should be > supported for CP2108. > > CP2108 has 4 serial interfaces but only 1 set of GPIO pins are shared > to all of those interfaces. So, just need to initialize GPIOs of CP2108 > with only one interface (I use interface 0). It means just only 1 gpiochip > device file will be created for CP2108. > > CP2108 has 16 GPIOs, So data types of several variables need to be is u16 > instead of u8(in struct cp210x_serial_private). This doesn't affect other > CP210x devices. > > Because CP2108 has 16 GPIO pins, the parameter passed by cp210x functions > will be different from other CP210x devices. So need to check part number > of the device to use correct data format before sending commands to > devices. > > Like CP2104, CP2108 have GPIO pins with configurable options. Therefore, > should be mask all pins which are not in GPIO mode in cp2108_gpio_init() > function. > > Fix build test WARNING reported by kernel test robot. > > Reported-by: Kernel test robot <lkp@xxxxxxxxx> The kernel test robot did not report this needed support :(
