On Tue, Mar 30, 2021 at 04:37:16PM +0200, Johan Hovold wrote:
> The XR21V141X does not have a 5- or 6-bit mode, but the current
> implementation failed to properly restore the old setting when CS5 or
> CS6 was requested. Instead an invalid request would be sent to the
> device.
>
> Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver")
> Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
Thanks,
Mani
> ---
> drivers/usb/serial/xr_serial.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
> index 0ca04906da4b..c59c8b47a120 100644
> --- a/drivers/usb/serial/xr_serial.c
> +++ b/drivers/usb/serial/xr_serial.c
> @@ -467,6 +467,11 @@ static void xr_set_termios(struct tty_struct *tty,
> termios->c_cflag &= ~CSIZE;
> if (old_termios)
> termios->c_cflag |= old_termios->c_cflag & CSIZE;
> + else
> + termios->c_cflag |= CS8;
> +
> + if (C_CSIZE(tty) == CS7)
> + bits |= XR21V141X_UART_DATA_7;
> else
> bits |= XR21V141X_UART_DATA_8;
> break;
> --
> 2.26.3
>
