On 3/23/21 6:55 AM, Hongren Zheng (Zenithal) wrote:
The commit e0546fd8b748 ("usbip: tools: Start using VUDC backend in
usbip tools") implemented device mode for user space tools, however the
corresponding options are not documented in man page.
This commit documents the options and provides examples on device mode.
Signed-off-by: Hongren Zheng <i@xxxxxxxxxxx>
---
tools/usb/usbip/doc/usbip.8 | 25 +++++++++++++++++++++++++
tools/usb/usbip/doc/usbipd.8 | 22 ++++++++++++++++++++++
2 files changed, 47 insertions(+)
PATCH v2:
Add signed-off-by line
PATCH v3:
Move patch changelog after the marker line
Remove nickname in signed-off-by line
PATCH v4:
Use commit short hash and message instead of long hash only when
referring to commit in the kernel
Thank you for the patch. Please see comments below:
diff --git a/tools/usb/usbip/doc/usbip.8 b/tools/usb/usbip/doc/usbip.8
index a15d20063b98..385b0eda8746 100644
--- a/tools/usb/usbip/doc/usbip.8
+++ b/tools/usb/usbip/doc/usbip.8
@@ -49,6 +49,13 @@ then exit.
Attach a remote USB device.
.PP
+.HP
+\fBattach\fR \-\-remote=<\fIhost\fR> \-\-device=<\fdev_id\fR>
+.IP
+Attach a remote USB gadget.
+Only used when the remote usbipd is in device mode.
+.PP
+
.HP
\fBdetach\fR \-\-port=<\fIport\fR>
.IP
This is a bit confusing. Please add a separate section for
Attach a remote USB gadget complete with attach and detach
instructions.
@@ -73,6 +80,14 @@ Stop exporting a device so it can be used by a local driver.
List USB devices exported by a remote host.
.PP
+.HP
+\fBlist\fR \-\-device
+.IP
+List USB gadgets of local usbip-vudc.
+Only used when the local usbipd is in device mode.
+This can not list usbip-vudc USB gadgets of the remote device mode usbipd.
+.PP
+
.HP
\fBlist\fR \-\-local
.IP
@@ -93,5 +108,15 @@ List local USB devices.
client:# usbip detach --port=0
- Detach the usb device.
+The following example shows the use of device mode
+
+ server:# usbip list --device
+ - Note this is the server side
+
+ client:# modprobe vhci-hcd
+
+ client:# usbip attach --remote=server --device=usbip-vudc.0
+ - Connect the remote USB gadget
+
.SH "SEE ALSO"
\fBusbipd\fP\fB(8)\fB\fP
diff --git a/tools/usb/usbip/doc/usbipd.8 b/tools/usb/usbip/doc/usbipd.8
index fb62a756893b..53c8d5792de6 100644
--- a/tools/usb/usbip/doc/usbipd.8
+++ b/tools/usb/usbip/doc/usbipd.8
@@ -29,6 +29,12 @@ Bind to IPv4. Default is both.
Bind to IPv6. Default is both.
.PP
+.HP
+\fB\-e\fR, \fB\-\-device\fR
+.IP
+Run in device mode. Rather than drive an attached device, create a virtual UDC to bind gadgets to.
+.PP
+
.HP
\fB\-D\fR, \fB\-\-daemon\fR
.IP
@@ -86,6 +92,22 @@ USB/IP client can connect and use exported devices.
- A usb device 1-2 is now exportable to other hosts!
- Use 'usbip unbind --busid=1-2' when you want to shutdown exporting and use the device locally.
+The following example shows the use of device mode
+
+ server:# modprobe usbip-vudc
+ - Use /sys/class/udc/ interface
+ - usbip-host is independent of this module.
+
+ server:# usbipd -e -D
+ - Start usbip daemon in device mode.
+
+ server:# modprobe g_mass_storage file=/tmp/tmp.img
+ - Bind a gadget to usbip-vudc
+ - in this example, a mass storage gadget is bound
+
+ server:# usbip list --device
+ - Note this is the server side
+
.SH "SEE ALSO"
\fBusbip\fP\fB(8)\fB\fP
thanks,
-- Shuah
