The driver can match only the devices created by the OF core
via the DT table, so the table should be always used.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/usb/mtu3/mtu3_plat.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index d44d5417438d..7786a95a874e 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -502,25 +502,20 @@ static const struct dev_pm_ops mtu3_pm_ops = {
#define DEV_PM_OPS (IS_ENABLED(CONFIG_PM) ? &mtu3_pm_ops : NULL)
-#ifdef CONFIG_OF
-
static const struct of_device_id mtu3_of_match[] = {
{.compatible = "mediatek,mt8173-mtu3",},
{.compatible = "mediatek,mtu3",},
{},
};
-
MODULE_DEVICE_TABLE(of, mtu3_of_match);
-#endif
-
static struct platform_driver mtu3_driver = {
.probe = mtu3_probe,
.remove = mtu3_remove,
.driver = {
.name = MTU3_DRIVER_NAME,
.pm = DEV_PM_OPS,
- .of_match_table = of_match_ptr(mtu3_of_match),
+ .of_match_table = mtu3_of_match,
},
};
module_platform_driver(mtu3_driver);
--
2.18.0
