Over-current reporting isn't supported on some platforms such as bcm63xx.
These devices will incorrectly report over-current if this flag isn't properly
activated.
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
v3: no changes.
v2: change flag name and improve documentation as suggested by Alan Stern.
Documentation/devicetree/bindings/usb/generic-ehci.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index cf83f2d9afac..8089dc956ba3 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -122,6 +122,12 @@ properties:
description:
Set this flag to force EHCI reset after resume.
+ spurious-oc:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Set this flag to indicate that the hardware sometimes turns on
+ the OC bit when an over-current isn't actually present.
+
companion:
$ref: /schemas/types.yaml#/definitions/phandle
description:
--
2.20.1
