Hi Mathias, Hi > > Could you add usbcore dynamic debug, it should show more details about hub activity. > > mount -t debugfs none /sys/kernel/debug > echo 'module usbcore =p' >/sys/kernel/debug/dynamic_debug/control > Here are the dmesg after I enabled dynamic debug. (at hub connection) [18746.363125] usb 1-3: new high-speed USB device number 7 using xhci_hcd [18747.635125] usb 1-3: new high-speed USB device number 8 using xhci_hcd [18747.790174] usb 1-3: New USB device found, idVendor=291a, idProduct=5423, bcdDevice= 1.0a [18747.790185] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18747.790190] usb 1-3: Product: 4-Port USB 2.0 Hub [18747.790194] usb 1-3: Manufacturer: Generic [18747.791444] hub 1-3:1.0: USB hub found [18747.791644] hub 1-3:1.0: 5 ports detected [18748.087060] usb 1-3.1: new high-speed USB device number 9 using xhci_hcd [18748.193599] usb 1-3.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55 [18748.193611] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18748.193615] usb 1-3.1: Product: USB2.1 Hub [18748.193618] usb 1-3.1: Manufacturer: GenesysLogic [18748.195938] hub 1-3.1:1.0: USB hub found [18748.196221] hub 1-3.1:1.0: 4 ports detected [18748.531325] hp_wmi: Unknown event_id - 131073 - 0x0 [18748.607073] usb 1-3.5: new high-speed USB device number 10 using xhci_hcd [18748.713602] usb 1-3.5: New USB device found, idVendor=0bda, idProduct=5450, bcdDevice= 1.01 [18748.713608] usb 1-3.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18748.713610] usb 1-3.5: Product: BillBoard Device [18748.713612] usb 1-3.5: Manufacturer: Realtek [18749.083366] hp_wmi: Unknown event_id - 131073 - 0x0 [18749.099460] pci 0000:02:00.0: [8086:15d3] type 01 class 0x060400 [18749.099544] pci 0000:02:00.0: enabling Extended Tags [18749.099804] pci 0000:02:00.0: supports D1 D2 [18749.099806] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [18749.100401] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400 [18749.100484] pci 0000:03:00.0: enabling Extended Tags [18749.100671] pci 0000:03:00.0: supports D1 D2 [18749.100674] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [18749.100879] pci 0000:03:01.0: [8086:15d3] type 01 class 0x060400 [18749.100942] pci 0000:03:01.0: enabling Extended Tags [18749.101066] pci 0000:03:01.0: supports D1 D2 [18749.101068] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [18749.101258] pci 0000:03:02.0: [8086:15d3] type 01 class 0x060400 [18749.101333] pci 0000:03:02.0: enabling Extended Tags [18749.101471] pci 0000:03:02.0: supports D1 D2 [18749.101474] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot D3cold [18749.101794] pci 0000:03:04.0: [8086:15d3] type 01 class 0x060400 [18749.101869] pci 0000:03:04.0: enabling Extended Tags [18749.102089] pci 0000:03:04.0: supports D1 D2 [18749.102093] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold [18749.102375] pci 0000:02:00.0: PCI bridge to [bus 03-6c] [18749.102395] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xde0fffff] [18749.102402] pci 0000:02:00.0: bridge window [mem 0x2f90000000-0x2fd9ffffff 64bit pref] [18749.102490] pci 0000:03:00.0: PCI bridge to [bus 04] [18749.102504] pci 0000:03:00.0: bridge window [mem 0xde000000-0xde0fffff] [18749.102583] pci 0000:03:01.0: PCI bridge to [bus 05-37] [18749.102596] pci 0000:03:01.0: bridge window [mem 0xb0000000-0xc7efffff] [18749.102604] pci 0000:03:01.0: bridge window [mem 0x2f90000000-0x2fafffffff 64bit pref] [18749.102748] pci 0000:38:00.0: [8086:15d4] type 00 class 0x0c0330 [18749.102776] pci 0000:38:00.0: reg 0x10: [mem 0xc7f00000-0xc7f0ffff] [18749.102861] pci 0000:38:00.0: enabling Extended Tags [18749.103107] pci 0000:38:00.0: supports D1 D2 [18749.103111] pci 0000:38:00.0: PME# supported from D0 D1 D2 D3hot D3cold [18749.103215] pci 0000:38:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:03:02.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [18749.103431] pci 0000:03:02.0: PCI bridge to [bus 38] [18749.103443] pci 0000:03:02.0: bridge window [mem 0xc7f00000-0xc7ffffff] [18749.103535] pci 0000:03:04.0: PCI bridge to [bus 39-6c] [18749.103548] pci 0000:03:04.0: bridge window [mem 0xc8000000-0xddffffff] [18749.103555] pci 0000:03:04.0: bridge window [mem 0x2fb0000000-0x2fd9ffffff 64bit pref] [18749.103596] pci_bus 0000:03: Allocating resources [18749.103624] pci 0000:03:01.0: bridge window [io 0x1000-0x0fff] to [bus 05-37] add_size 1000 [18749.103629] pci 0000:03:02.0: bridge window [io 0x1000-0x0fff] to [bus 38] add_size 1000 [18749.103631] pci 0000:03:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 38] add_size 200000 add_align 100000 [18749.103635] pci 0000:03:04.0: bridge window [io 0x1000-0x0fff] to [bus 39-6c] add_size 1000 [18749.103638] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03-6c] add_size 4000 [18749.103645] pci 0000:02:00.0: BAR 13: assigned [io 0x2000-0x5fff] [18749.103652] pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [18749.103654] pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [18749.103657] pci 0000:03:01.0: BAR 13: assigned [io 0x2000-0x2fff] [18749.103659] pci 0000:03:02.0: BAR 13: assigned [io 0x3000-0x3fff] [18749.103661] pci 0000:03:04.0: BAR 13: assigned [io 0x4000-0x4fff] [18749.103665] pci 0000:03:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [18749.103667] pci 0000:03:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [18749.103669] pci 0000:03:00.0: PCI bridge to [bus 04] [18749.103678] pci 0000:03:00.0: bridge window [mem 0xde000000-0xde0fffff] [18749.103690] pci 0000:03:01.0: PCI bridge to [bus 05-37] [18749.103693] pci 0000:03:01.0: bridge window [io 0x2000-0x2fff] [18749.103699] pci 0000:03:01.0: bridge window [mem 0xb0000000-0xc7efffff] [18749.103704] pci 0000:03:01.0: bridge window [mem 0x2f90000000-0x2fafffffff 64bit pref] [18749.103712] pci 0000:03:02.0: PCI bridge to [bus 38] [18749.103716] pci 0000:03:02.0: bridge window [io 0x3000-0x3fff] [18749.103722] pci 0000:03:02.0: bridge window [mem 0xc7f00000-0xc7ffffff] [18749.103733] pci 0000:03:04.0: PCI bridge to [bus 39-6c] [18749.103735] pci 0000:03:04.0: bridge window [io 0x4000-0x4fff] [18749.103740] pci 0000:03:04.0: bridge window [mem 0xc8000000-0xddffffff] [18749.103744] pci 0000:03:04.0: bridge window [mem 0x2fb0000000-0x2fd9ffffff 64bit pref] [18749.103752] pci 0000:02:00.0: PCI bridge to [bus 03-6c] [18749.103756] pci 0000:02:00.0: bridge window [io 0x2000-0x5fff] [18749.103762] pci 0000:02:00.0: bridge window [mem 0xb0000000-0xde0fffff] [18749.103767] pci 0000:02:00.0: bridge window [mem 0x2f90000000-0x2fd9ffffff 64bit pref] [18749.103853] pcieport 0000:02:00.0: enabling device (0006 -> 0007) [18749.112985] pcieport 0000:03:01.0: enabling device (0006 -> 0007) [18749.113561] pcieport 0000:03:02.0: enabling device (0006 -> 0007) [18749.114275] pcieport 0000:03:04.0: enabling device (0006 -> 0007) [18749.116042] xhci_hcd 0000:38:00.0: xHCI Host Controller [18749.116048] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 3 [18749.117311] xhci_hcd 0000:38:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810 [18749.117782] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11 [18749.117785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [18749.117787] usb usb3: Product: xHCI Host Controller [18749.117789] usb usb3: Manufacturer: Linux 5.11.0-051100-generic xhci-hcd [18749.117791] usb usb3: SerialNumber: 0000:38:00.0 [18749.117985] hub 3-0:1.0: USB hub found [18749.117995] hub 3-0:1.0: 2 ports detected [18749.118900] xhci_hcd 0000:38:00.0: xHCI Host Controller [18749.118904] xhci_hcd 0000:38:00.0: new USB bus registered, assigned bus number 4 [18749.118908] xhci_hcd 0000:38:00.0: Host supports USB 3.1 Enhanced SuperSpeed [18749.118961] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11 [18749.118964] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [18749.118965] usb usb4: Product: xHCI Host Controller [18749.118967] usb usb4: Manufacturer: Linux 5.11.0-051100-generic xhci-hcd [18749.118968] usb usb4: SerialNumber: 0000:38:00.0 [18749.119164] hub 4-0:1.0: USB hub found [18749.119177] hub 4-0:1.0: 2 ports detected [18749.463260] usb 4-2: new SuperSpeedPlus Gen 2 USB device number 2 using xhci_hcd [18749.486323] usb 4-2: New USB device found, idVendor=2900, idProduct=8383, bcdDevice= 1.0a [18749.486344] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18749.486354] usb 4-2: Product: 4-Port USB 3.0 Hub [18749.486361] usb 4-2: Manufacturer: Generic [18749.490230] hub 4-2:1.0: USB hub found [18749.490676] hub 4-2:1.0: 4 ports detected [18749.791233] usb 4-2.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [18749.818255] usb 4-2.1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.55 [18749.818268] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [18749.818275] usb 4-2.1: Product: USB3.1 Hub [18749.818279] usb 4-2.1: Manufacturer: GenesysLogic [18749.820840] hub 4-2.1:1.0: USB hub found [18749.821202] hub 4-2.1:1.0: 4 ports detected [18750.111133] usb 4-2.1.3: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [18750.135823] usb 4-2.1.3: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [18750.135840] usb 4-2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [18750.135842] usb 4-2.1.3: Product: USB 10/100/1000 LAN [18750.135843] usb 4-2.1.3: Manufacturer: Realtek [18750.135844] usb 4-2.1.3: SerialNumber: 000001 [18750.219205] usb 4-2.1.4: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd [18750.240829] usb 4-2.1.4: New USB device found, idVendor=058f, idProduct=8468, bcdDevice= 1.00 [18750.240838] usb 4-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [18750.240839] usb 4-2.1.4: Product: Mass Storage Device [18750.240840] usb 4-2.1.4: Manufacturer: Generic [18750.240841] usb 4-2.1.4: SerialNumber: 058F84688461 [18750.319697] usb 4-2.1.3: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd [18750.344307] r8152 4-2.1.3:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2 [18750.344330] r8152 4-2.1.3:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2) [18750.365494] usb-storage 4-2.1.4:1.0: USB Mass Storage device detected [18750.366060] scsi host4: usb-storage 4-2.1.4:1.0 [18750.366502] usbcore: registered new interface driver usb-storage [18750.374087] usbcore: registered new interface driver uas [18750.387495] r8152 4-2.1.3:1.0 eth0: v1.11.11 [18750.463135] r8152 4-2.1.3:1.0 enx00e04cb5877c: renamed from eth0 [18751.368123] scsi 4:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 6 [18751.368733] scsi 4:0:0:1: Direct-Access Generic- Micro SD/M2 1.08 PQ: 0 ANSI: 6 [18751.369524] sd 4:0:0:0: Attached scsi generic sg0 type 0 [18751.370071] sd 4:0:0:1: Attached scsi generic sg1 type 0 [18751.388549] sd 4:0:0:0: [sda] Attached SCSI removable disk [18751.388976] sd 4:0:0:1: [sdb] Attached SCSI removable disk [18753.631878] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04cb5877c: link becomes ready [18753.632485] r8152 4-2.1.3:1.0 enx00e04cb5877c: carrier on (at hub disconnection) [18848.819858] [drm] PCIE GART of 256M enabled (table at 0x000000F400000000). [18848.999416] [drm] UVD and UVD ENC initialized successfully. [18849.100370] [drm] VCE initialized successfully. [18946.839352] usb 1-3: USB disconnect, device number 8 [18946.839373] usb 1-3.1: USB disconnect, device number 9 [18946.840644] usb 1-3.5: USB disconnect, device number 10 [18946.890865] r8152 4-2.1.3:1.0 enx00e04cb5877c: Tx status -71 [18946.916623] r8152 4-2.1.3:1.0 enx00e04cb5877c: Stop submitting intr, status -71 [18947.068201] usb usb3-port2: over-current condition [18947.604290] usb 4-2: USB disconnect, device number 2 [18947.604307] usb 4-2.1: USB disconnect, device number 3 [18947.604315] usb 4-2.1.3: USB disconnect, device number 4 [18947.604721] r8152 4-2.1.3:1.0 enx00e04cb5877c: Tx status -108 [18947.604748] r8152 4-2.1.3:1.0 enx00e04cb5877c: Tx status -108 [18947.604756] r8152 4-2.1.3:1.0 enx00e04cb5877c: Tx status -108 [18947.604763] r8152 4-2.1.3:1.0 enx00e04cb5877c: Tx status -108 [18947.685529] usb 4-2.1.4: USB disconnect, device number 5 [18948.304163] usb usb4-port2: over-current condition > > hub reports overcurrent condition, worth keeping in mind. > This condition can actually persist through reboot. Which causes the kworker to spawn immediately after boot. > > Is this xHC contoller in a Alpine Ridge/Titan Ridge/Maple Ridge based system > that has runtime PM enabled by default, and whole xHC controller > disappears from PCI bus when last device is disconnected? > (check with lspci -nn) > It is an Alpine Ridge controller. Here is the `lspci -nn` output 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [8086:5910] (rev 05) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [8086:1901] (rev 05) 00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:591b] (rev 04) 00:04.0 Signal processing controller [1180]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem [8086:1903] (rev 05) 00:13.0 Non-VGA unclassified device [0000]: Intel Corporation 100 Series/C230 Series Chipset Family Integrated Sensor Hub [8086:a135] (rev 31) 00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) 00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem [8086:a131] (rev 31) 00:15.0 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 [8086:a160] (rev 31) 00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31) 00:17.0 SATA controller [0106]: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] [8086:a103] (rev 31) 00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 [8086:a110] (rev f1) 00:1c.4 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 [8086:a114] (rev f1) 00:1c.5 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #6 [8086:a115] (rev f1) 00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 [8086:a118] (rev f1) 00:1e.0 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO UART #0 [8086:a127] (rev 31) 00:1e.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO GSPI #0 [8086:a129] (rev 31) 00:1f.0 ISA bridge [0601]: Intel Corporation HM175 Chipset LPC/eSPI Controller [8086:a152] (rev 31) 00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller [8086:a121] (rev 31) 00:1f.3 Audio device [0403]: Intel Corporation CM238 HD Audio Controller [8086:a171] (rev 31) 00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family SMBus [8086:a123] (rev 31) 01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Polaris 22 [Radeon RX Vega M GL] [1002:694e] (rev c0) 02:00.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:00.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:01.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:02.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:04.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 38:00.0 USB controller [0c03]: Intel Corporation JHL6540 Thunderbolt 3 USB Controller (C step) [Alpine Ridge 4C 2016] [8086:15d4] (rev 02) 6d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01) 6e:00.0 Network controller [0280]: Intel Corporation Wireless 8265 / 8275 [8086:24fd] (rev 78) 6f:00.0 Non-Volatile memory controller [0108]: Sandisk Corp Device [15b7:5002] One thing I notice is that when the hub is disconnected, the USB controller is still there. It will remain there until I plug and unplug another device. After that, the following section will be gone. 02:00.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:00.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:01.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:02.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 03:04.0 PCI bridge [0604]: Intel Corporation JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge 4C 2016] [8086:15d3] (rev 02) 38:00.0 USB controller [0c03]: Intel Corporation JHL6540 Thunderbolt 3 USB Controller (C step) [Alpine Ridge 4C 2016] [8086:15d4] (rev 02) > Does it help if another USB device is connected to a different > roothub port of this xHC while disconnecting the hub? > Or does just disabling runtime PM for this xhci help? > I tried with another usb device on the root hub port. But it does not help. I am not sure about how to disable runtime PM. I tried to use `echo on > .../0000:38:00.0/power/control` (its value was auto). But it also does not help. Thanks Yiyu Zhu
