v3 - remove "disable_dma" module param because it can be done
by modifying the device tree node instead. Reduce size by
removing some debug fuctionality that was no longer used.
- Fix error from yaml compiler in bindings
v2 - remove the patch that modified 8250_of.c to keep it from
registering before this driver when this driver was deferred
as it was getting it's "clocks". This was fixed by changing
the Device Tree entry to remove "clock-frequency". This results
in both drivers getting "clocks" and getting same the deferral.
Al Cooper (2):
dt-bindings: Add support for the Broadcom UART driver
serial: 8250: Add new 8250-core based Broadcom STB driver
.../bindings/serial/brcm,bcm7271-uart.yaml | 96 ++
MAINTAINERS | 8 +
drivers/tty/serial/8250/8250_bcm7271.c | 1099 +++++++++++++++++
drivers/tty/serial/8250/Kconfig | 11 +
drivers/tty/serial/8250/Makefile | 1 +
drivers/tty/serial/8250/bcm7271_uart.h | 158 +++
6 files changed, 1373 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
create mode 100644 drivers/tty/serial/8250/8250_bcm7271.c
create mode 100644 drivers/tty/serial/8250/bcm7271_uart.h
--
2.17.1
