Viral Mehta wrote:
SZÉKELYI Szabolcs wrote:
Hi,
I have a USB 2.0 device (namely a Creative X-Fi Surround 5.1 sound
card) that's
recognized as a 1.1 device thus running at only 12Mbps. The trouble
is that even
stereo audio is crispy this way, running it at high speed may solve
it. I've
seen messages in the kernel log like
I hope you are attaching your device to 2.0 port.
As long as I know, if device will work as high speed or full speed is
decided at bus enumeration time.
So, if you know using usbmon logs, that can help...
I also assume that you do not have any other devices attached to host
and also there are not any hubs in between.
[ 117.410000] cannot submit datapipe for urb 0, error -28: not
enough bandwidth
Any other messages in dmesg ?
coming from the snd-usb-audio module. I guess it's the USB framework
that is
responsible for determining the speed for a given device, since --
according to
the kernel log -- the speed is known even before the appropriate
driver (this
time snd-usb-audio) is loaded.
So my question is: what should I do or change in the kernel source to
force the
USB framework to recognize this device as a high speed one?
what kernel? what distribution? This data equally matters along with
logs.
Sorry if this is a
dumb question or it has been answered before, feel free to suggest
pointers.
Thanks,
Thanks,
Viral Mehta,
Embedded Software Engineer,
Tel. No. 91 79 26563705, Ext. 423
www.einfochips.com <http://www.einfochips.com>
--
_____________________________________________________________________
Disclaimer: This e-mail message and all attachments transmitted with it
are intended solely for the use of the addressee and may contain legally
privileged and confidential information. If the reader of this message
is not the intended recipient, or an employee or agent responsible for
delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution, copying, or other use of
this message or its attachments is strictly prohibited. If you have
received this message in error, please notify the sender immediately by
replying to this message and please delete it from your computer. Any
views expressed in this message are those of the individual sender
unless otherwise stated.Company has taken enough precautions to prevent
the spread of viruses. However the company accepts no liability for any
damage caused by any virus transmitted by this email.
_____________________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
