From: Piyush Mehta <piyush.mehta@xxxxxxxxxx> Added dt binding for usb5744 driver. Signed-off-by: Piyush Mehta <piyush.mehta@xxxxxxxxxx> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx> --- Changes in v2: None .../bindings/usb/microchip,usb5744.yaml | 56 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/microchip,usb5744.yaml diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml new file mode 100644 index 000000000000..fe222f6db81d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/microchip,usb5744.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Bindings for the Microchip USB5744 4-port Hub Controller + +description: + Microchip’s USB5744 SmartHub™ IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS), + low power, low pin count configurable and fully compliant with the USB 3.1 + Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed + (LS) USB signaling, offering complete coverage of all defined USB operating + speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0 + controller, so 5 Gbps SuperSpeed data transfers are not affected by slower + USB 2.0 traffic. + +maintainers: + - Piyush Mehta <piyush.mehta@xxxxxxxxxx> + - Michal Simek <michal.simek@xxxxxxxxxx> + +properties: + compatible: + const: microchip,usb5744 + + reg: + maxItems: 1 + description: | + Specifies the i2c slave address, it is required and should be 0x2d + if I2C is used. + + reset-gpios: + maxItems: 1 + description: + The phandle and specifier for the GPIO that controls the RESET line of + USB hub. + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + usb5744@2d { + compatible = "microchip,usb5744"; + reg = <0x2d>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 41e8d3d7faec..7439471b5d37 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2697,6 +2697,7 @@ W: http://wiki.xilinx.com T: git https://github.com/Xilinx/linux-xlnx.git F: Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml F: Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml +F: Documentation/devicetree/bindings/usb/microchip,usb5744.yaml F: arch/arm/mach-zynq/ F: drivers/block/xsysace.c F: drivers/clocksource/timer-cadence-ttc.c -- 2.30.0
