Add back a few explanatory comments related to the divisor encoding which got lost in a coding-style clean up many years ago. Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> --- drivers/usb/serial/ftdi_sio.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 94398f89e600..a6837a60c06a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1153,13 +1153,13 @@ static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) divisor = divisor3 >> 3; divisor3 &= 0x7; if (divisor3 == 1) - divisor |= 0xc000; + divisor |= 0xc000; /* +0.125 */ else if (divisor3 >= 4) - divisor |= 0x4000; + divisor |= 0x4000; /* +0.5 */ else if (divisor3 != 0) - divisor |= 0x8000; + divisor |= 0x8000; /* +0.25 */ else if (divisor == 1) - divisor = 0; /* special case for maximum baud rate */ + divisor = 0; /* special case for maximum baud rate */ return divisor; } @@ -1177,9 +1177,9 @@ static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ - if (divisor == 1) + if (divisor == 1) /* 1.0 */ divisor = 0; - else if (divisor == 0x4001) + else if (divisor == 0x4001) /* 1.5 */ divisor = 1; return divisor; } @@ -1201,9 +1201,9 @@ static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) divisor = divisor3 >> 3; divisor |= (u32)divfrac[divisor3 & 0x7] << 14; /* Deal with special cases for highest baud rates. */ - if (divisor == 1) + if (divisor == 1) /* 1.0 */ divisor = 0; - else if (divisor == 0x4001) + else if (divisor == 0x4001) /* 1.5 */ divisor = 1; /* * Set this bit to turn off a divide by 2.5 on baud rate generator -- 2.26.2
