On Thu, Jan 21, 2021 at 12:57 PM Oliver Neukum <oneukum@xxxxxxxx> wrote:
>
> The driver has a status method for receiving speed updates.
> The framework, however, had support functions only for devices
> that reported their speed upon an explicit query over a MDIO
> interface.
> CDC_NCM however gets direct notifications from the device.
> As new support functions have become available, we shall now
> record such notifications and tell the usbnet framework
> to make direct use of them without going through the PHY layer.
>
> v2: adjusted to recent changes
>
> Signed-off-by: Oliver Neukum <oneukum@xxxxxxxx>
> Tested-by: Roland Dreier <roland@xxxxxxxxxx>
> ---
> drivers/net/usb/cdc_ncm.c | 29 ++++-------------------------
> 1 file changed, 4 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
> index 04174704bf7c..9b5bb8ae5eb8 100644
> --- a/drivers/net/usb/cdc_ncm.c
> +++ b/drivers/net/usb/cdc_ncm.c
> @@ -142,7 +142,7 @@ static const struct ethtool_ops cdc_ncm_ethtool_ops = {
> .get_sset_count = cdc_ncm_get_sset_count,
> .get_strings = cdc_ncm_get_strings,
> .get_ethtool_stats = cdc_ncm_get_ethtool_stats,
> - .get_link_ksettings = usbnet_get_link_ksettings_mdio,
> + .get_link_ksettings = usbnet_get_link_ksettings_internal,
> .set_link_ksettings = usbnet_set_link_ksettings_mdio,
> };
>
> @@ -1827,30 +1827,9 @@ cdc_ncm_speed_change(struct usbnet *dev,
> uint32_t rx_speed = le32_to_cpu(data->DLBitRRate);
> uint32_t tx_speed = le32_to_cpu(data->ULBitRate);
>
> - /* if the speed hasn't changed, don't report it.
> - * RTL8156 shipped before 2021 sends notification about every 32ms.
> - */
> - if (dev->rx_speed == rx_speed && dev->tx_speed == tx_speed)
> - return;
> -
> - dev->rx_speed = rx_speed;
> - dev->tx_speed = tx_speed;
Oliver,
This patch removes the use of "rx_speed" field but doesn't remove the
field from struct usbnet (usbnet.h).
It might be better to revert my patch (make that the first patch in
your series) and use your original patches.
OR use "rx_speed" as the field name in the entire series and move them
to the preferred location in struct usbnet (patch 2/3).
cheers,
grant
> -
> - /*
> - * Currently the USB-NET API does not support reporting the actual
> - * device speed. Do print it instead.
> - */
> - if ((tx_speed > 1000000) && (rx_speed > 1000000)) {
> - netif_info(dev, link, dev->net,
> - "%u mbit/s downlink %u mbit/s uplink\n",
> - (unsigned int)(rx_speed / 1000000U),
> - (unsigned int)(tx_speed / 1000000U));
> - } else {
> - netif_info(dev, link, dev->net,
> - "%u kbit/s downlink %u kbit/s uplink\n",
> - (unsigned int)(rx_speed / 1000U),
> - (unsigned int)(tx_speed / 1000U));
> - }
> + /* RTL8156 shipped before 2021 sends notification about every 32ms. */
> + dev->rxspeed = rx_speed;
> + dev->txspeed = tx_speed;
> }
>
> static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
> --
> 2.26.2
>
