Re: [PATCH v2 1/2] dt-bindings: Add support for the Broadcom UART driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 15 Jan 2021 16:15:42 -0500, Al Cooper wrote:
> Add DT bindings for the Broadcom 8250 based UART driver. This
> UART is based on an 8250 but adds additional functionality. The
> additional features include the ability to use DMA for transfers and
> a baud rate clock system that is more accurate at high baud rates.
> This UART is backward compatible with the standard 8250 UART.
> 
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
> ---
>  .../bindings/serial/brcm,bcm7271-uart.yaml    | 94 +++++++++++++++++++
>  1 file changed, 94 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml: 'additionalProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml

See https://patchwork.ozlabs.org/patch/1427364

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux