Prefer using the BIT macro to define bit fileds Cc: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- v4 resend: base on kernel 5.11-rc1 v4: no changes, but rebase on kernel 5.10-rc1 v3: add acked-by Florian v2: add Cc Florian --- drivers/usb/gadget/udc/bdc/bdc.h | 84 ++++++++++++++++---------------- 1 file changed, 42 insertions(+), 42 deletions(-) diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h index f8d595804258..8d00b1239f21 100644 --- a/drivers/usb/gadget/udc/bdc/bdc.h +++ b/drivers/usb/gadget/udc/bdc/bdc.h @@ -102,7 +102,7 @@ #define BDC_SPB(p) ((p) & 0x7) /* BDC Capability1 */ -#define BDC_P64 (1 << 0) +#define BDC_P64 BIT(0) /* BDC Command register */ #define BDC_CMD_FH 0xe @@ -111,7 +111,7 @@ #define BDC_CMD_BLA 0x3 #define BDC_CMD_EPC 0x2 #define BDC_CMD_DVC 0x1 -#define BDC_CMD_CWS (0x1 << 5) +#define BDC_CMD_CWS BIT(5) #define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6) #define BDC_CMD_EPN(p) (((p) & 0x1f) << 10) #define BDC_SUB_CMD_ADD (0x1 << 17) @@ -124,7 +124,7 @@ #define BDC_SUB_CMD_EP_STP (0x2 << 17) #define BDC_SUB_CMD_EP_STL (0x4 << 17) #define BDC_SUB_CMD_EP_RST (0x1 << 17) -#define BDC_CMD_SRD (1 << 27) +#define BDC_CMD_SRD BIT(27) /* CMD completion status */ #define BDC_CMDS_SUCC 0x1 @@ -141,19 +141,19 @@ #define EPM_SHIFT 4 /* BDC USPSC */ -#define BDC_VBC (1 << 31) -#define BDC_PRC (1 << 30) -#define BDC_PCE (1 << 29) -#define BDC_CFC (1 << 28) -#define BDC_PCC (1 << 27) -#define BDC_PSC (1 << 26) -#define BDC_VBS (1 << 25) -#define BDC_PRS (1 << 24) -#define BDC_PCS (1 << 23) +#define BDC_VBC BIT(31) +#define BDC_PRC BIT(30) +#define BDC_PCE BIT(29) +#define BDC_CFC BIT(28) +#define BDC_PCC BIT(27) +#define BDC_PSC BIT(26) +#define BDC_VBS BIT(25) +#define BDC_PRS BIT(24) +#define BDC_PCS BIT(23) #define BDC_PSP(p) (((p) & (0x7 << 20))>>20) -#define BDC_SCN (1 << 8) -#define BDC_SDC (1 << 7) -#define BDC_SWS (1 << 4) +#define BDC_SCN BIT(8) +#define BDC_SDC BIT(7) +#define BDC_SWS BIT(4) #define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf) #define BDC_PSP(p) (((p) & (0x7 << 20))>>20) @@ -167,17 +167,17 @@ #define BDC_PST_MASK 0xf /* USPPMS */ -#define BDC_U2E (0x1 << 31) -#define BDC_U1E (0x1 << 30) -#define BDC_U2A (0x1 << 29) -#define BDC_PORT_W1S (0x1 << 17) +#define BDC_U2E BIT(31) +#define BDC_U1E BIT(30) +#define BDC_U2A BIT(29) +#define BDC_PORT_W1S BIT(17) #define BDC_U1T(p) ((p) & 0xff) #define BDC_U2T(p) (((p) & 0xff) << 8) #define BDC_U1T_MASK 0xff /* USBPM2 */ /* Hardware LPM Enable */ -#define BDC_HLE (1 << 16) +#define BDC_HLE BIT(16) /* BDC Status and Control */ #define BDC_COP_RST (1 << 29) @@ -186,11 +186,11 @@ #define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP) -#define BDC_COS (1 << 28) +#define BDC_COS BIT(28) #define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20) -#define BDC_MASK_MCW (1 << 7) -#define BDC_GIE (1 << 1) -#define BDC_GIP (1 << 0) +#define BDC_MASK_MCW BIT(7) +#define BDC_GIE BIT(1) +#define BDC_GIP BIT(0) #define BDC_HLT 1 #define BDC_NOR 2 @@ -201,19 +201,19 @@ #define BD_CHAIN 0xf #define BD_TFS_SHIFT 4 -#define BD_SOT (1 << 26) -#define BD_EOT (1 << 27) -#define BD_ISP (1 << 29) -#define BD_IOC (1 << 30) -#define BD_SBF (1 << 31) +#define BD_SOT BIT(26) +#define BD_EOT BIT(27) +#define BD_ISP BIT(29) +#define BD_IOC BIT(30) +#define BD_SBF BIT(31) #define BD_INTR_TARGET(p) (((p) & 0x1f) << 27) -#define BDC_SRR_RWS (1 << 4) -#define BDC_SRR_RST (1 << 3) -#define BDC_SRR_ISR (1 << 2) -#define BDC_SRR_IE (1 << 1) -#define BDC_SRR_IP (1 << 0) +#define BDC_SRR_RWS BIT(4) +#define BDC_SRR_RST BIT(3) +#define BDC_SRR_ISR BIT(2) +#define BDC_SRR_IE BIT(1) +#define BDC_SRR_IP BIT(0) #define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24) #define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16) #define BDC_SRR_DPI_MASK 0x00ff0000 @@ -221,7 +221,7 @@ #define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT) /* Control transfer BD specific fields */ -#define BD_DIR_IN (1 << 25) +#define BD_DIR_IN BIT(25) #define BDC_PTC_MASK 0xf0000000 @@ -241,13 +241,13 @@ /* Transfer BD fields */ #define BD_LEN(p) ((p) & 0x1ffff) -#define BD_LTF (1 << 25) +#define BD_LTF BIT(25) #define BD_TYPE_DS 0x1 #define BD_TYPE_SS 0x2 -#define BDC_EP_ENABLED (1 << 0) -#define BDC_EP_STALL (1 << 1) -#define BDC_EP_STOP (1 << 2) +#define BDC_EP_ENABLED BIT(0) +#define BDC_EP_STALL BIT(1) +#define BDC_EP_STOP BIT(2) /* One BD can transfer max 65536 bytes */ #define BD_MAX_BUFF_SIZE (1 << 16) @@ -266,9 +266,9 @@ /* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */ #define BDC_TNOTIFY 2500 /*in ms*/ /* Devstatus bitfields */ -#define REMOTE_WAKEUP_ISSUED (1 << 16) -#define DEVICE_SUSPENDED (1 << 17) -#define FUNC_WAKE_ISSUED (1 << 18) +#define REMOTE_WAKEUP_ISSUED BIT(16) +#define DEVICE_SUSPENDED BIT(17) +#define FUNC_WAKE_ISSUED BIT(18) #define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP) /* On disconnect, preserve these bits and clear rest */ -- 2.18.0
