This commit enables the use of the r8153_ecm driver, introduced with
commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for
RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the
Realtek RTL8153B chip.
This results in the following driver preference:
- if r8152 is available, use the r8152 driver
- if r8152 is not available, use the r8153_ecm driver
This is done to prevent the NIC from constantly sending pause frames
when the host system enters standby (fixed by using the r8152 driver
in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing
the device to work with the r8153_ecm driver as a fallback.
Signed-off-by: Leon Schuermann <leon@is.currently.online>
Tested-by: Leon Schuermann <leon@is.currently.online>
---
drivers/net/usb/r8153_ecm.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/usb/r8153_ecm.c b/drivers/net/usb/r8153_ecm.c
index 2c3fabd38b16..20b2df8d74ae 100644
--- a/drivers/net/usb/r8153_ecm.c
+++ b/drivers/net/usb/r8153_ecm.c
@@ -122,12 +122,20 @@ static const struct driver_info r8153_info = {
};
static const struct usb_device_id products[] = {
+/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
{
USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&r8153_info,
},
+/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
+{
+ USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_LENOVO, 0x721e, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&r8153_info,
+},
+
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
--
2.29.2
