[Bug 210801] TopSeed Technology Corp. eHome Infrared Transceiver spams log with Error: urb status = -71

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugzilla.kernel.org/show_bug.cgi?id=210801

--- Comment #5 from Hans-Peter Jansen (hpj@xxxxxxxxx) ---
Okay, reverting 528222d853f92 does the trick. 

My RC is working fine again for VDR, I can pull and plug the RC controller, VDR
is complaining, but after restarting VDR, all is fine again. 

This is the kernel log of pulling and plugging the RC controller:
```
[    4.903556] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR
receiver, raw IR transmitter
[    5.084059] mceusb 5-10.4:1.0: long-range (0x1) receiver active
[    5.127510] mceusb 5-10.4:1.0: Registered TopSeed Technology Corp. eHome
Infrared Transceiver with mce emulator interface version 1
[    5.127512] mceusb 5-10.4:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1
active)
[    5.127530] usbcore: registered new interface driver mceusb
[ 1537.725685] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.733681] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.741680] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.749683] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.757670] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.765684] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.773662] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.781659] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1537.789654] mceusb 5-10.4:1.0: Error: urb status = -71
[ 1540.361827] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR
receiver, raw IR transmitter
[ 1540.541769] mceusb 5-10.4:1.0: long-range (0x1) receiver active
[ 1540.585785] mceusb 5-10.4:1.0: Registered TopSeed Technology Corp. eHome
Infrared Transceiver with mce emulator interface version 1
[ 1540.585787] mceusb 5-10.4:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1
active)
```

With 528222d853f92 applied, I wasn't able to recover at all, I had to stop VDR
and pulling the RC controller in order to stop flooding the log with the urb
status = -71 errors.

Sean, do you have any idea, what could have changed with 528222d853f92
resulting in this behavior?

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux