On Mon, Jan 04, 2021 at 11:29:39PM +0900, Daniel Palmer wrote:
> Hi Johan,
>
> On Mon, 4 Jan 2021 at 19:32, Johan Hovold <johan@xxxxxxxxxx> wrote:
>
> > Also, would you mind posting the "lsusb -v" output for this device for
> > reference?
>
> The lsusb from busybox on this system doesn't support the -v option it seems.
> Here is the output from /sys/kernel/debug/usb/devices:
>
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=2df3 ProdID=9d03 Rev= 1.00
> S: Manufacturer=Marvell
> S: Product=Mobile Composite Device Bus
> S: SerialNumber=<snip>
> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
> E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
> E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
>
> I can rebuild my rootfs with the usbutils lsusb tomorrow when I have
> physical access to it again if needed.
That's ok, the above will do just fine.
It looks like we must not try to bind to the first two interfaces
however:
{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */
> >Do you know what each interface is used for?
>
> The second tty responds to AT commands. The others don't do anything so far.
> The hardware documentation doesn't say much aside that there is a usb interface.
Ok, thanks. I'll apply this one with the above change now.
Johan
