NXP imx8mp integrates 2 dwc3 3.30b IP and add some wakeup logic to support low power mode, the glue layer is for this wakeup functionality, which has a separated interrupt, can support wakeup from U3 and connect events for host, and vbus wakeup for device. Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Li Jun <jun.li@xxxxxxx> --- .../devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 105 +++++++++++++++++++++ 1 file changed, 105 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml new file mode 100644 index 0000000..cb4c6f6 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX8MP Soc USB Controller + +maintainers: + - Li Jun <jun.li@xxxxxxx> + +properties: + compatible: + const: fsl,imx8mp-dwc3 + + reg: + maxItems: 1 + description: Address and length of the register set for the wrapper of + dwc3 core on the SOC. + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + dma-ranges: + description: + See section 2.3.9 of the DeviceTree Specification. + + ranges: true + + interrupts: + maxItems: 1 + description: The interrupt that is asserted when a wakeup event is + received. + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: system hsio root clock. + - description: suspend clock, used for usb wakeup logic. + + clock-names: + items: + - const: hsio + - const: suspend + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block + The content of the node is defined in dwc3.txt. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - dma-ranges + - ranges + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + usb3_0: usb@32f10100 { + compatible = "fsl,imx8mp-dwc3"; + reg = <0x32f10100 0x8>; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "hsio", "suspend"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x40000000 0x40000000 0xc0000000>; + ranges; + + dwc3@38100000 { + compatible = "snps,dwc3"; + reg = <0x38100000 0x10000>; + clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_USB_CORE_REF>, + <&clk IMX8MP_CLK_USB_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy0>, <&usb3_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis-u2-freeclk-exists-quirk; + }; + }; -- 2.7.4
