On 20-12-23 16:19:06, Yuval Shaia wrote: > Hello, > I'm using a board equipped with ChipIdea UDC and trying to expose storage device (for example) out of it. > > I load the following modules/drivers: > udc-core > libcomposite > ci_hdrc > ci_hdrc_usb > usb_f_mass_storage. > > Next, I used the basic setup via configfs: > idVendor = 0x1d6b > idProduct = 0x0001 > > Created an empty config, function and linked the function to configuration: > mkdir configs/c.1 > mkdir functions/mass_storage.1 > (also created lun0 with dd) > ln -s functions/mass_storage.1 configs/c.1 > > Then started the device: > echo ci_hdrc.0 > UDC > > On device side I can see that the setup from Linux perspective is looking good: > [ 8.360082] Mass Storage Function, version: 2009/09/11 > [ 8.360094] LUN: removable file: (no medium) > > However on the host side I see some errors: > [ 10.087328] usb 1-1: device descriptor read/64, error -32 > [ 10.455328] usb 1-1: device descriptor read/64, error -32 > [ 10.695328] usb 1-1: device descriptor read/64, error -32 > [ 11.875327] usb 1-1: device not accepting address 4, error -32 > [ 12.423327] usb 1-1: device not accepting address 5, error -32 > [ 12.429178] usb usb1-port1: unable to enumerate USB device > > I added some debug printks to both coreidea/udc.c and coreidea/core.c and can see that the interatom between the platform driver and the device controller is ok (i.e interrupts etc). > > git tag 4.14.76. > Your kernel is a little older, try more recently kernel. From the log, it fails at the first EP0 transfer, the interrupt you see may for port change and bus reset. There are tracepoint supports for chipidea UDC and gadget layer at recently support, try to enable it and see what happens again. -- Thanks, Peter Chen
