The PHY hardware needs the delay of 2ms after power up, otherwise initial interrupt may be lost if USB controller is accessed before PHY is settled down. Previously this issue was masked by implicit delays, but now it pops up after squashing the older ehci-tegra driver into the ChipIdea driver. Tested-by: Matt Merhar <mattmerhar@xxxxxxxxxxxxxx> Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx> Tested-by: Peter Geis <pgwipeout@xxxxxxxxx> Tested-by: Ion Agorria <ion@xxxxxxxxxxx> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> --- drivers/usb/phy/phy-tegra-usb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 03a333797382..1296524e1bee 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -784,6 +784,9 @@ static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) phy->powered_on = true; + /* Let PHY settle down */ + usleep_range(2000, 2500); + return 0; } -- 2.29.2
