On Wed, Oct 28, 2020 at 02:08:00AM +0530, Sandeep Maheswaram wrote: > Adding suspend quirk function for dwc3 host which will be called > during xhci suspend. > Setting hs_phy_mode, ss_phy_mode flags and phy mode during host suspend. > > Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> > --- > drivers/usb/dwc3/host.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 51 insertions(+) > > diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c > index e195176..db03db8 100644 > --- a/drivers/usb/dwc3/host.c > +++ b/drivers/usb/dwc3/host.c > @@ -11,6 +11,13 @@ > #include <linux/platform_device.h> > > #include "core.h" > +#include "../host/xhci.h" > +#include "../host/xhci-plat.h" > +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd); > + > +static const struct xhci_plat_priv xhci_plat_dwc3_xhci = { > + .suspend_quirk = xhci_dwc3_suspend_quirk, > +}; > > static int dwc3_host_get_irq(struct dwc3 *dwc) > { > @@ -115,6 +122,13 @@ int dwc3_host_init(struct dwc3 *dwc) > } > } > > + ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci, > + sizeof(struct xhci_plat_priv)); > + if (ret) { > + dev_err(dwc->dev, "failed to add data to xHCI\n"); > + goto err; > + } > + > ret = platform_device_add(xhci); > if (ret) { > dev_err(dwc->dev, "failed to register xHCI device\n"); > @@ -127,6 +141,43 @@ int dwc3_host_init(struct dwc3 *dwc) > return ret; > } > > +static void dwc3_set_phy_mode(struct usb_hcd *hcd) > +{ > + > + int i, num_ports; > + u32 reg; > + unsigned int ss_phy_mode = 0; > + struct device *dev = hcd->self.controller; > + struct dwc3 *dwc = dev_get_drvdata(dev->parent); nit: the use of 'dev' seems misleading here. By convention 'dev' refers to the 'struct device' of the driver, here it refers to a child of that device. It's probably not super-important, but 'dev' is also not realy needed, you could omit it and change the assignment of 'dwc3' to: struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent); > + struct xhci_hcd *xhci_hcd = hcd_to_xhci(hcd); > + > + dwc->hs_phy_mode = 0; > + > + reg = readl(&xhci_hcd->cap_regs->hcs_params1); > + > + num_ports = HCS_MAX_PORTS(reg); > + for (i = 0; i < num_ports; i++) { > + reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04); > + if (reg & PORT_PE) { > + if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg)) > + dwc->hs_phy_mode |= PHY_MODE_USB_HOST_HS; > + else if (DEV_LOWSPEED(reg)) > + dwc->hs_phy_mode |= PHY_MODE_USB_HOST_LS; > + > + if (DEV_SUPERSPEED(reg)) > + ss_phy_mode |= PHY_MODE_USB_HOST_SS; > + } > + } > + phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_mode); > + phy_set_mode(dwc->usb3_generic_phy, ss_phy_mode); > +} > + > +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd) > +{ > + dwc3_set_phy_mode(hcd); > + return 0; > +} > + > void dwc3_host_exit(struct dwc3 *dwc) > { > platform_device_unregister(dwc->xhci); Other than the nit: Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>