Re: Issues with LaCie USB3 drive and UAS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Montag, den 07.12.2020, 10:53 +0000 schrieb David C. Partridge:
> Using options usb-storage quirks=059f:105f:ks
> 
> Dec 07 10:40:40 charon kernel: usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
> Dec 07 10:40:40 charon kernel: usb 2-1: New USB device found, idVendor=059f, idProduct=105f, bcdDevice= 0.01
> Dec 07 10:40:40 charon kernel: usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> Dec 07 10:40:40 charon kernel: usb 2-1: Product: 2Big Quadra USB3
> Dec 07 10:40:40 charon kernel: usb 2-1: Manufacturer: LaCie
> Dec 07 10:40:40 charon kernel: usb 2-1: SerialNumber: 00000000250e9e711084
> Dec 07 10:40:40 charon mtp-probe[2790]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
> Dec 07 10:40:40 charon mtp-probe[2790]: bus: 2, device: 2 was not an MTP device
> Dec 07 10:40:40 charon kernel: usb_storage: loading out-of-tree module taints kernel.
> Dec 07 10:40:40 charon kernel: usb_storage: module verification failed: signature and/or required key missing - tainting kernel
> Dec 07 10:40:40 charon kernel: usbcore: registered new interface driver usb-storage
> Dec 07 10:40:40 charon kernel: scsi host5: uas
> Dec 07 10:40:40 charon kernel: usbcore: registered new interface driver uas
> Dec 07 10:40:40 charon kernel: scsi 5:0:0:0: Direct-Access     LaCie    2Big Quadra v3   051E PQ: 0 ANSI: 6
> Dec 07 10:40:40 charon kernel: sd 5:0:0:0: Attached scsi generic sg3 type 0
> Dec 07 10:40:40 charon mtp-probe[2799]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
> Dec 07 10:40:40 charon mtp-probe[2799]: bus: 2, device: 2 was not an MTP device
> Dec 07 10:40:40 charon kernel: sd 5:0:0:0: [sdc] 7814025564 512-byte logical blocks: (4.00 TB/3.64 TiB)
> Dec 07 10:40:40 charon kernel: sd 5:0:0:0: [sdc] Write Protect is off
> Dec 07 10:40:40 charon kernel: sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
> Dec 07 10:40:40 charon kernel: sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Dec 07 10:40:57 charon kernel: usb 2-1: USB disconnect, device number 2

Again, did you plug the cable or did the device spontaneously
disconnect?

> Dec 07 10:40:57 charon kernel: sd 5:0:0:0: [sdc] Optimal transfer size 33553920 bytes
> Dec 07 10:40:57 charon kernel: sd 5:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
> Dec 07 10:40:57 charon kernel: sd 5:0:0:0: [sdc] Sense not available.
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] Sense not available.
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] Attached SCSI disk

To be expected in that case.

> Dec 07 10:40:58 charon kernel: usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
> Dec 07 10:40:58 charon kernel: usb 2-1: New USB device found, idVendor=059f, idProduct=105f, bcdDevice= 0.01
> Dec 07 10:40:58 charon kernel: usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> Dec 07 10:40:58 charon kernel: usb 2-1: Product: 2Big Quadra USB3
> Dec 07 10:40:58 charon kernel: usb 2-1: Manufacturer: LaCie
> Dec 07 10:40:58 charon kernel: usb 2-1: SerialNumber: 00000000250e9e711084
> Dec 07 10:40:58 charon kernel: scsi host5: uas
> Dec 07 10:40:58 charon kernel: scsi 5:0:0:0: Direct-Access     LaCie    2Big Quadra v3   051E PQ: 0 ANSI: 6
> Dec 07 10:40:58 charon kernel: scsi 5:0:0:0: Attached scsi generic sg3 type 0
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] 7814025564 512-byte logical blocks: (4.00 TB/3.64 TiB)
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] Write Protect is off
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
> Dec 07 10:40:58 charon kernel: sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Dec 07 10:40:59 charon mtp-probe[2858]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
> Dec 07 10:40:59 charon mtp-probe[2858]: bus: 2, device: 3 was not an MTP device
> Dec 07 10:40:59 charon mtp-probe[2861]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1"
> Dec 07 10:40:59 charon mtp-probe[2861]: bus: 2, device: 3 was not an MTP device
> Dec 07 10:41:29 charon kernel: sd 5:0:0:0: tag#6 uas_eh_abort_handler 0 uas-tag 1 inflight: IN 
> Dec 07 10:41:29 charon kernel: sd 5:0:0:0: tag#6 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00

OK, the SCSI layer is not reacting as desired.

> Dec 07 10:41:29 charon kernel: scsi host5: uas_eh_device_reset_handler start
> Dec 07 10:41:29 charon kernel: usb 2-1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
> Dec 07 10:41:29 charon kernel: scsi host5: uas_eh_device_reset_handler success

In this case, could you retry with
usb-storage quirks=059f:105f:kf
?

	Regards
		Oliver





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux