[PATCH v1 2/4] usb: typec: fusb302: Update retry count based on the negotiated rev

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



By default the driver sets the retry count to 3 (Default for PD 2.0).
Update this to 2, if the negotiated rev is PD 3.0.

Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
---
 drivers/usb/typec/tcpm/fusb302.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index 99562cc65ca6..ebc46b9f776c 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -343,12 +343,11 @@ static int fusb302_sw_reset(struct fusb302_chip *chip)
 	return ret;
 }
 
-static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip)
+static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip, u8 retry_count)
 {
 	int ret = 0;
 
-	ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
-				   FUSB_REG_CONTROL3_N_RETRIES_3 |
+	ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3, retry_count |
 				   FUSB_REG_CONTROL3_AUTO_RETRY);
 
 	return ret;
@@ -399,7 +398,7 @@ static int tcpm_init(struct tcpc_dev *dev)
 	ret = fusb302_sw_reset(chip);
 	if (ret < 0)
 		return ret;
-	ret = fusb302_enable_tx_auto_retries(chip);
+	ret = fusb302_enable_tx_auto_retries(chip, FUSB_REG_CONTROL3_N_RETRIES_3);
 	if (ret < 0)
 		return ret;
 	ret = fusb302_init_interrupt(chip);
@@ -1017,7 +1016,7 @@ static const char * const transmit_type_name[] = {
 };
 
 static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
-			    const struct pd_message *msg)
+			    const struct pd_message *msg, unsigned int negotiated_rev)
 {
 	struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 						 tcpc_dev);
@@ -1026,6 +1025,13 @@ static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
 	mutex_lock(&chip->lock);
 	switch (type) {
 	case TCPC_TX_SOP:
+		/* nRetryCount 3 in P2.0 spec, whereas 2 in PD3.0 spec */
+		ret = fusb302_enable_tx_auto_retries(chip, negotiated_rev > PD_REV20 ?
+						     FUSB_REG_CONTROL3_N_RETRIES_2 :
+						     FUSB_REG_CONTROL3_N_RETRIES_3);
+		if (ret < 0)
+			fusb302_log(chip, "Cannot update retry count ret=%d", ret);
+
 		ret = fusb302_pd_send_message(chip, msg);
 		if (ret < 0)
 			fusb302_log(chip,
-- 
2.29.2.454.gaff20da3a2-goog




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux