On Mon, Nov 23, 2020 at 10:01:36PM +0800, Li Jun wrote:
> This patch adds a simple typec switch driver for cases which only
> needs some simple operations but a dedicated driver is required,
> current driver only supports GPIO toggle to switch the super speed
> active channel according to typec orientation.
>
> Signed-off-by: Li Jun <jun.li@xxxxxxx>
Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> ---
> Changes for v6:
> - Use general mux control for typec switch, currently only support
> max 2 GPIOs to control one typec switch with 3 states: orientation
> normal(cc1), reverse(cc2), none(deselected both channels).
>
> Changes for v5:
> - A few changes address Andy's comment, remove gpio check as it's
> optional, add module name for Kconfig, use correct header files,
> and other minor changes.
> - Remove the mutex lock as it's not required currently.
>
> Changes for v4:
> - Change driver name to be switch simple from switch GPIO, to make it
> generic for possible extention.
> - Use compatiable "typec-orientation-switch" instead of bool property
> for switch matching.
> - Make acitve channel selection GPIO to be optional.
> - Remove Andy's R-b tag since the driver changes a lot.
>
> Change for v3:
> - Remove file name in driver description.
> - Add Andy Shevchenko's Reviewed-by tag.
>
> Changes for v2:
> - Use the correct head files for gpio api and of_device_id:
> #include <linux/gpio/consumer.h>
> #include <linux/mod_devicetable.h>
> - Add driver dependency on GPIOLIB
>
> drivers/usb/typec/mux/Kconfig | 10 +++
> drivers/usb/typec/mux/Makefile | 1 +
> drivers/usb/typec/mux/switch-simple.c | 126 ++++++++++++++++++++++++++++++++++
> 3 files changed, 137 insertions(+)
>
> diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
> index a4dbd11..11320d7 100644
> --- a/drivers/usb/typec/mux/Kconfig
> +++ b/drivers/usb/typec/mux/Kconfig
> @@ -18,4 +18,14 @@ config TYPEC_MUX_INTEL_PMC
> control the USB role switch and also the multiplexer/demultiplexer
> switches used with USB Type-C Alternate Modes.
>
> +config TYPEC_SWITCH_SIMPLE
> + tristate "Type-C orientation switch simple driver"
> + depends on GPIOLIB
> + help
> + Say Y or M if your system need a simple driver for typec switch
> + control, like use GPIO to select active channel.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called switch-simple.
> +
> endmenu
> diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
> index 280a6f5..712d0ad 100644
> --- a/drivers/usb/typec/mux/Makefile
> +++ b/drivers/usb/typec/mux/Makefile
> @@ -2,3 +2,4 @@
>
> obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
> obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o
> +obj-$(CONFIG_TYPEC_SWITCH_SIMPLE) += switch-simple.o
> diff --git a/drivers/usb/typec/mux/switch-simple.c b/drivers/usb/typec/mux/switch-simple.c
> new file mode 100644
> index 0000000..4671169
> --- /dev/null
> +++ b/drivers/usb/typec/mux/switch-simple.c
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Type-C switch simple control driver
> + *
> + * Copyright 2020 NXP
> + * Author: Jun Li <jun.li@xxxxxxx>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/mutex.h>
> +#include <linux/mux/driver.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/typec_mux.h>
> +
> +struct typec_switch_simple {
> + struct typec_switch *sw;
> + struct mux_control *mux;
> + struct gpio_descs *switch_gpios;
> +};
> +
> +static int typec_switch_simple_mux_set(struct mux_control *mux, int state)
> +{
> + struct typec_switch_simple *typec_ss = mux_chip_priv(mux->chip);
> + DECLARE_BITMAP(values, BITS_PER_TYPE(state));
> +
> + values[0] = state;
> + gpiod_set_array_value_cansleep(typec_ss->switch_gpios->ndescs,
> + typec_ss->switch_gpios->desc,
> + typec_ss->switch_gpios->info,
> + values);
> +
> + return 0;
> +}
> +
> +static const struct mux_control_ops typec_switch_mux_ops = {
> + .set = typec_switch_simple_mux_set,
> +};
> +
> +static int typec_switch_simple_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct mux_chip *mux_chip;
> + struct typec_switch_desc sw_desc;
> + struct typec_switch_simple *typec_ss;
> + int idle_state;
> + int pins;
> + int ret;
> +
> + pins = gpiod_count(dev, "switch");
> + mux_chip = devm_mux_chip_alloc(dev, 1, sizeof(*typec_ss));
> + if (IS_ERR(mux_chip))
> + return PTR_ERR(mux_chip);
> +
> + typec_ss = mux_chip_priv(mux_chip);
> + mux_chip->ops = &typec_switch_mux_ops;
> +
> + /* Get the super speed active channel selection GPIO */
> + typec_ss->switch_gpios = devm_gpiod_get_array_optional(dev,
> + "switch", GPIOD_OUT_LOW);
> + if (IS_ERR(typec_ss->switch_gpios))
> + return PTR_ERR(typec_ss->switch_gpios);
> +
> + if (pins) {
> + WARN_ON(pins != typec_ss->switch_gpios->ndescs || pins > 2);
> + mux_chip->mux->states = pins + 1;
> + }
> +
> + ret = device_property_read_u32(dev, "idle-state", (u32 *)&idle_state);
> + if (ret >= 0 && idle_state != MUX_IDLE_AS_IS) {
> + if (idle_state < 0 || idle_state >= mux_chip->mux->states) {
> + dev_err(dev, "invalid idle-state %u\n", idle_state);
> + return -EINVAL;
> + }
> + mux_chip->mux->idle_state = idle_state;
> + }
> +
> + ret = devm_mux_chip_register(dev, mux_chip);
> + if (ret < 0)
> + return ret;
> +
> + platform_set_drvdata(pdev, typec_ss);
> + sw_desc.drvdata = typec_ss;
> + sw_desc.fwnode = dev->fwnode;
> +
> + typec_ss->sw = typec_switch_register(&mux_chip->dev, &sw_desc);
> + if (IS_ERR(typec_ss->sw)) {
> + dev_err(dev, "Error registering typec switch: %ld\n",
> + PTR_ERR(typec_ss->sw));
> + return PTR_ERR(typec_ss->sw);
> + }
> +
> + return 0;
> +}
> +
> +static int typec_switch_simple_remove(struct platform_device *pdev)
> +{
> + struct typec_switch_simple *typec_ss = platform_get_drvdata(pdev);
> +
> + typec_switch_unregister(typec_ss->sw);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id of_typec_switch_simple_match[] = {
> + { .compatible = "typec-orientation-switch" },
> + { /* Sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, of_typec_switch_simple_match);
> +
> +static struct platform_driver typec_switch_simple_driver = {
> + .probe = typec_switch_simple_probe,
> + .remove = typec_switch_simple_remove,
> + .driver = {
> + .name = "typec-switch-simple",
> + .of_match_table = of_typec_switch_simple_match,
> + },
> +};
> +
> +module_platform_driver(typec_switch_simple_driver);
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("TypeC Orientation Switch Simple driver");
> +MODULE_AUTHOR("Jun Li <jun.li@xxxxxxx>");
> --
> 2.7.4
thanks,
--
heikki
