STM32MP15 ahbcfg register default value sets Burst length/type (HBSTLEN) to Single (32-bit accesses on AHB), which is not recommended, according to STM32MP157 Reference manual [1]. This patch sets Burst length/type (HBSTLEN) so that bus transactions target 16x32 bit accesses. This improves OTG controller performance. [1] https://www.st.com/resource/en/reference_manual/dm00327659.pdf, p.3149 Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx> --- drivers/usb/dwc2/params.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 267543c3dc38..0df693319f0a 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -177,6 +177,7 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg) p->i2c_enable = false; p->activate_stm_fs_transceiver = true; p->activate_stm_id_vb_detection = true; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; p->power_down = DWC2_POWER_DOWN_PARAM_NONE; } @@ -189,6 +190,7 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg) p->host_rx_fifo_size = 440; p->host_nperio_tx_fifo_size = 256; p->host_perio_tx_fifo_size = 256; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; p->power_down = DWC2_POWER_DOWN_PARAM_NONE; } -- 2.17.1
