Hi Utkarsh,
On Wed, Nov 18, 2020 at 10:32:09PM -0800, Utkarsh Patel wrote:
> Configure Thunderbolt 3 cable generation value by filling Thunderbolt 3
> cable discover mode VDO to support rounded Thunderbolt 3 cables.
> While we are here use Thunderbolt 3 cable discover mode VDO to fill active
> cable plug link training value.
>
> Suggested-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> Signed-off-by: Utkarsh Patel <utkarsh.h.patel@xxxxxxxxx>
>
> --
> Changes in v3:
> - Added a check for cable's TBT support before filling TBT3 discover mode
> VDO.
>
> Changes in v2:
> - No change.
> --
> ---
> drivers/platform/chrome/cros_ec_typec.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
> index 8111ed1fc574..68b17ee1d1ae 100644
> --- a/drivers/platform/chrome/cros_ec_typec.c
> +++ b/drivers/platform/chrome/cros_ec_typec.c
> @@ -514,8 +514,18 @@ static int cros_typec_enable_usb4(struct cros_typec_data *typec,
> else if (pd_ctrl->control_flags & USB_PD_CTRL_ACTIVE_CABLE)
> data.eudo |= EUDO_CABLE_TYPE_RE_TIMER << EUDO_CABLE_TYPE_SHIFT;
>
> - data.active_link_training = !!(pd_ctrl->control_flags &
> - USB_PD_CTRL_ACTIVE_LINK_UNIDIR);
> + /*
> + * Filling TBT3 Cable VDO when TBT3 cable is being used to establish
> + * USB4 connection.
> + */
> + if (pd_ctrl->cable_gen) {
> + data.tbt_cable_vdo = TBT_MODE;
> +
> + if (pd_ctrl->control_flags & USB_PD_CTRL_ACTIVE_LINK_UNIDIR)
> + data.tbt_cable_vdo |= TBT_CABLE_LINK_TRAINING;
> +
> + data.tbt_cable_vdo |= TBT_SET_CABLE_ROUNDED(pd_ctrl->cable_gen);
> + }
I think the following would decouple Rounded Support and Active Cable Link
Training?:
struct typec_thunderbolt_data data = {};
...
if (pd_ctrl->control_flags & USB_PD_CTRL_ACTIVE_LINK_UNIDIR)
data.tbt_cable_vdo |= TBT_CABLE_LINK_TRAINING;
data.tbt_cable_vdo |= TBT_SET_CABLE_ROUNDED(pd_ctrl->cable_gen);
if (data.tbt_cable_vdo)
data.tbt_cable_vdo |= TBT_MODE;
Best regards,
-Prashant
