Re: [PATCH] USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO built-in usb-audio card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 18, 2020 at 05:53:43PM +0800, penghao wrote:
> Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in
> usb-audio. when A630Z going into S3,the system immediately wakeup 7-8
> seconds later by usb-audio disconnect interrupt to avoids the issue.
> 
> Seeking a better fix, we've tried a lot of things, including:
>  - Check that the device's power/wakeup is disabled
>  - Check that remote wakeup is off at the USB level
>  - All the quirks in drivers/usb/core/quirks.c
>    e.g. USB_QUIRK_RESET_RESUME,
>         USB_QUIRK_RESET,
>         USB_QUIRK_IGNORE_REMOTE_WAKEUP,
>         USB_QUIRK_NO_LPM.
> 
> but none of that makes any difference.
> 
> There are no errors in the logs showing any suspend/resume-related issues.
> When the system wakes up due to the modem, log-wise it appears to be a
> normal resume.
> 
> Introduce a quirk to disable the port during suspend when the modem is
> detected.
> 
> Changes since v3
>  - Fixed spelling error on appropriate
> 
> Changes since v2
>  - Add Changes commit format
> 
> Changes since v1
>  - Change subject form "ALSA" to "USB:"
>  - Adjust to appropriate line
> 
> Signed-off-by: penghao <penghao@xxxxxxxxxxxxx>
> ---
>  drivers/usb/core/quirks.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
> index 7c1198f80c23..25f655c2cd28 100644
> --- a/drivers/usb/core/quirks.c
> +++ b/drivers/usb/core/quirks.c
> @@ -410,6 +410,10 @@ static const struct usb_device_id usb_quirk_list[] = {
>  	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
>  			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
>  
> +	/* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */
> +	{ USB_DEVICE(0x17ef, 0xa012), .driver_info =
> +			USB_QUIRK_DISCONNECT_SUSPEND },
> +
>  	/* BUILDWIN Photo Frame */
>  	{ USB_DEVICE(0x1908, 0x1315), .driver_info =
>  			USB_QUIRK_HONOR_BNUMINTERFACES },
> @@ -430,6 +434,7 @@ static const struct usb_device_id usb_quirk_list[] = {
>  	  USB_QUIRK_DELAY_CTRL_MSG },
>  
>  	/* Corsair Strafe RGB */
> +

You are still leaving this blank line being added to the file, please do
not do that.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux