Avoid r8153_ecm is compiled as built-in, if r8152 driver is compiled
as modules. Otherwise, the r8153_ecm would be used, even though the
device is supported by r8152 driver.
Fixes: c1aedf015ebd ("net/usb/r8153_ecm: support ECM mode for RTL8153")
Reported-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
---
v2:
Use a separate Kconfig entry for r8153_ecm with proper dependencies.
drivers/net/usb/Kconfig | 9 +++++++++
drivers/net/usb/Makefile | 3 ++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index b46993d5f997..1e3719028780 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -628,4 +628,13 @@ config USB_NET_AQC111
This driver should work with at least the following devices:
* Aquantia AQtion USB to 5GbE
+config USB_RTL8153_ECM
+ tristate "RTL8153 ECM support"
+ depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n)
+ default y
+ help
+ This option supports ECM mode for RTL8153 ethernet adapter, when
+ CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not
+ supported by r8152 driver.
+
endif # USB_NET_DRIVERS
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index 99381e6bea78..4964f7b326fb 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -13,7 +13,7 @@ obj-$(CONFIG_USB_LAN78XX) += lan78xx.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
asix-y := asix_devices.o asix_common.o ax88172a.o
obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o
-obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r8153_ecm.o
+obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_SR9700) += sr9700.o
@@ -41,3 +41,4 @@ obj-$(CONFIG_USB_NET_QMI_WWAN) += qmi_wwan.o
obj-$(CONFIG_USB_NET_CDC_MBIM) += cdc_mbim.o
obj-$(CONFIG_USB_NET_CH9200) += ch9200.o
obj-$(CONFIG_USB_NET_AQC111) += aqc111.o
+obj-$(CONFIG_USB_RTL8153_ECM) += r8153_ecm.o
--
2.26.2
