[PATCH 3/4] arm64: dts: rockchip: add rk3328 usb3 and usb3phy nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the usb3 controller and usb3 phy nodes to the rk3328.

Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 65 ++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index bbdb19a3e85d..9fea9203d114 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -853,6 +853,40 @@ u2phy_host: host-port {
 		};
 	};
 
+	usb3phy: usb3-phy@ff470000 {
+		compatible = "rockchip,rk3328-usb3phy";
+		reg = <0x0 0xff460000 0x0 0x10000>;
+		clocks = <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>;
+		clock-names = "usb3phy-otg", "usb3phy-pipe";
+		resets = <&cru SRST_USB3PHY_U2>,
+			 <&cru SRST_USB3PHY_U3>,
+			 <&cru SRST_USB3PHY_PIPE>,
+			 <&cru SRST_USB3OTG_UTMI>,
+			 <&cru SRST_USB3PHY_OTG_P>,
+			 <&cru SRST_USB3PHY_PIPE_P>;
+		reset-names = "usb3phy-u2-por", "usb3phy-u3-por",
+			      "usb3phy-pipe-mac", "usb3phy-utmi-mac",
+			      "usb3phy-utmi-apb", "usb3phy-pipe-apb";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb3phy_utmi: utmi@ff470000 {
+			compatible = "rockchip,rk3328-usb3phy-utmi";
+			reg = <0x0 0xff470000 0x0 0x8000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb3phy_pipe: pipe@ff478000 {
+			compatible = "rockchip,rk3328-usb3phy-pipe";
+			reg = <0x0 0xff478000 0x0 0x8000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
 	sdmmc: mmc@ff500000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff500000 0x0 0x4000>;
@@ -983,6 +1017,37 @@ usb_host0_ohci: usb@ff5d0000 {
 		status = "disabled";
 	};
 
+       usbdrd3: usb@ff600000 {
+		compatible = "rockchip,rk3328-dwc3";
+		clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
+			 <&cru SCLK_USB3OTG_SUSPEND>;
+		clock-names = "ref", "bus_early", "suspend";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usbdrd_dwc3: dwc3@ff600000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff600000 0x0 0x100000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru SCLK_USB3OTG_REF>, <&cru ACLK_USB3OTG>,
+				 <&cru SCLK_USB3OTG_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
+			dr_mode = "host";
+			usb-phy = <&usb3phy_utmi>, <&usb3phy_pipe>;
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			snps,xhci-trb-ent-quirk;
+			status = "disabled";
+		};
+	};
+
 	gic: interrupt-controller@ff811000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
-- 
2.25.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux