reset_control_(de)assert() calls are called on a shared reset line when reset_control_reset has been used. This is not allowed by the reset framework. Use reset_control_rearm() call in suspend() and remove() as a way to state that the resource is no longer used, hence the shared reset line may be triggered again by other devices. Use reset_control_rearm() also in case probe fails after reset() has been called. reset_control_rearm() keeps use of triggered_count sane in the reset framework, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx> Reported-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> --- Important: Please DO NOT merge before this patch [0] is merged, it adds reset_control_rearm() call to the reset framework API. [0] https://lore.kernel.org/lkml/20201112230043.28987-1-aouledameur@baylib re.com/ drivers/usb/dwc3/dwc3-meson-g12a.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index 417e05381b5d..3fec8f591c93 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -750,7 +750,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) ret = dwc3_meson_g12a_get_phys(priv); if (ret) - goto err_disable_clks; + goto err_rearm; ret = priv->drvdata->setup_regmaps(priv, base); if (ret) @@ -759,7 +759,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) if (priv->vbus) { ret = regulator_enable(priv->vbus); if (ret) - goto err_disable_clks; + goto err_rearm; } /* Get dr_mode */ @@ -772,13 +772,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) ret = priv->drvdata->usb_init(priv); if (ret) - goto err_disable_clks; + goto err_rearm; /* Init PHYs */ for (i = 0 ; i < PHY_COUNT ; ++i) { ret = phy_init(priv->phys[i]); if (ret) - goto err_disable_clks; + goto err_rearm; } /* Set PHY Power */ @@ -816,6 +816,9 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) for (i = 0 ; i < PHY_COUNT ; ++i) phy_exit(priv->phys[i]); +err_rearm: + reset_control_rearm(priv->reset); + err_disable_clks: clk_bulk_disable_unprepare(priv->drvdata->num_clks, priv->drvdata->clks); @@ -843,6 +846,8 @@ static int dwc3_meson_g12a_remove(struct platform_device *pdev) pm_runtime_put_noidle(dev); pm_runtime_set_suspended(dev); + reset_control_rearm(priv->reset); + clk_bulk_disable_unprepare(priv->drvdata->num_clks, priv->drvdata->clks); @@ -883,7 +888,7 @@ static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev) phy_exit(priv->phys[i]); } - reset_control_assert(priv->reset); + reset_control_rearm(priv->reset); return 0; } @@ -893,7 +898,9 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev) struct dwc3_meson_g12a *priv = dev_get_drvdata(dev); int i, ret; - reset_control_deassert(priv->reset); + ret = reset_control_reset(priv->reset); + if (ret) + return ret; ret = priv->drvdata->usb_init(priv); if (ret) -- 2.17.1
