Re: [PATCH 1/3] usb: gadget: f_uac2/u_audio: add feedback endpoint support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 20-11-08 02:18:29, Ruslan Bilovol wrote:
> As per USB and UAC2 specs, asynchronous audio sink endpoint
> requires explicit synchronization mechanism (Isochronous
> Feedback Endpoint)
> 
> Implement feedback companion endpoint for ISO OUT endpoint
> 
> This patch adds all required infrastructure and USB requests
> handling for feedback endpoint. Syncrhonization itself is
> still dummy (feedback ep always reports 'nomimal frequency'
>  e.g. no adjustement is needed). This satisfies hosts that
> require feedback endpoint (like Win10) and poll it periodically
> 
> Actual synchronization mechanism should be implemented
> separately
> 
> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
> ---
>  drivers/usb/gadget/function/f_uac2.c  |  34 +++++++++-
>  drivers/usb/gadget/function/u_audio.c | 124 +++++++++++++++++++++++++++++++++-
>  drivers/usb/gadget/function/u_audio.h |   3 +
>  3 files changed, 158 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
> index fb9b875..a57bf77 100644
> --- a/drivers/usb/gadget/function/f_uac2.c
> +++ b/drivers/usb/gadget/function/f_uac2.c
> @@ -237,7 +237,7 @@ enum {
>  	.bDescriptorType = USB_DT_INTERFACE,
>  
>  	.bAlternateSetting = 1,
> -	.bNumEndpoints = 1,
> +	.bNumEndpoints = 2,
>  	.bInterfaceClass = USB_CLASS_AUDIO,
>  	.bInterfaceSubClass = USB_SUBCLASS_AUDIOSTREAMING,
>  	.bInterfaceProtocol = UAC_VERSION_2,
> @@ -296,6 +296,27 @@ enum {
>  	.wLockDelay = 0,
>  };
>  
> +/* STD AS ISO IN Feedback Endpoint */
> +static struct usb_endpoint_descriptor fs_epin_fback_desc = {
> +	.bLength = USB_DT_ENDPOINT_SIZE,
> +	.bDescriptorType = USB_DT_ENDPOINT,
> +
> +	.bEndpointAddress = USB_DIR_IN,
> +	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK,
> +	.wMaxPacketSize = cpu_to_le16(3),
> +	.bInterval = 1,
> +};
> +
> +static struct usb_endpoint_descriptor hs_epin_fback_desc = {
> +	.bLength = USB_DT_ENDPOINT_SIZE,
> +	.bDescriptorType = USB_DT_ENDPOINT,
> +
> +	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK,
> +	.wMaxPacketSize = cpu_to_le16(4),
> +	.bInterval = 4,
> +};
> +
> +
>  /* Audio Streaming IN Interface - Alt0 */
>  static struct usb_interface_descriptor std_as_in_if0_desc = {
>  	.bLength = sizeof std_as_in_if0_desc,
> @@ -392,6 +413,7 @@ enum {
>  	(struct usb_descriptor_header *)&as_out_fmt1_desc,
>  	(struct usb_descriptor_header *)&fs_epout_desc,
>  	(struct usb_descriptor_header *)&as_iso_out_desc,
> +	(struct usb_descriptor_header *)&fs_epin_fback_desc,
>  
>  	(struct usb_descriptor_header *)&std_as_in_if0_desc,
>  	(struct usb_descriptor_header *)&std_as_in_if1_desc,
> @@ -422,6 +444,7 @@ enum {
>  	(struct usb_descriptor_header *)&as_out_fmt1_desc,
>  	(struct usb_descriptor_header *)&hs_epout_desc,
>  	(struct usb_descriptor_header *)&as_iso_out_desc,
> +	(struct usb_descriptor_header *)&hs_epin_fback_desc,
>  
>  	(struct usb_descriptor_header *)&std_as_in_if0_desc,
>  	(struct usb_descriptor_header *)&std_as_in_if1_desc,
> @@ -541,6 +564,7 @@ static void setup_descriptor(struct f_uac2_opts *opts)
>  		fs_audio_desc[i++] = USBDHDR(&as_out_fmt1_desc);
>  		fs_audio_desc[i++] = USBDHDR(&fs_epout_desc);
>  		fs_audio_desc[i++] = USBDHDR(&as_iso_out_desc);
> +		fs_audio_desc[i++] = USBDHDR(&fs_epin_fback_desc);
>  	}
>  	if (EPIN_EN(opts)) {
>  		fs_audio_desc[i++] = USBDHDR(&std_as_in_if0_desc);
> @@ -574,6 +598,7 @@ static void setup_descriptor(struct f_uac2_opts *opts)
>  		hs_audio_desc[i++] = USBDHDR(&as_out_fmt1_desc);
>  		hs_audio_desc[i++] = USBDHDR(&hs_epout_desc);
>  		hs_audio_desc[i++] = USBDHDR(&as_iso_out_desc);
> +		hs_audio_desc[i++] = USBDHDR(&hs_epin_fback_desc);
>  	}
>  	if (EPIN_EN(opts)) {
>  		hs_audio_desc[i++] = USBDHDR(&std_as_in_if0_desc);
> @@ -681,6 +706,12 @@ static void setup_descriptor(struct f_uac2_opts *opts)
>  			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
>  			return -ENODEV;
>  		}
> +		agdev->in_ep_fback = usb_ep_autoconfig(gadget,
> +						       &fs_epin_fback_desc);
> +		if (!agdev->in_ep_fback) {
> +			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
> +			return -ENODEV;
> +		}
>  	}
>  
>  	if (EPIN_EN(uac2_opts)) {
> @@ -699,6 +730,7 @@ static void setup_descriptor(struct f_uac2_opts *opts)
>  				le16_to_cpu(hs_epout_desc.wMaxPacketSize));
>  
>  	hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress;
> +	hs_epin_fback_desc.bEndpointAddress = fs_epin_fback_desc.bEndpointAddress;
>  	hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress;
>  
>  	setup_descriptor(uac2_opts);
> diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
> index e6d32c5..33c9288 100644
> --- a/drivers/usb/gadget/function/u_audio.c
> +++ b/drivers/usb/gadget/function/u_audio.c
> @@ -43,6 +43,10 @@ struct uac_rtd_params {
>  	unsigned int max_psize;	/* MaxPacketSize of endpoint */
>  	struct uac_req *ureq;
>  
> +	struct usb_request *req_fback; /* Feedback endpoint request */
> +	unsigned int ffback; /* Real frequency reported by feedback endpoint */
> +	bool fb_ep_enabled; /* if the ep is enabled */
> +
>  	spinlock_t lock;
>  };
>  
> @@ -76,6 +80,35 @@ struct snd_uac_chip {
>  	.periods_min = MIN_PERIODS,
>  };
>  
> +static void u_audio_set_fback_frequency(enum usb_device_speed speed,
> +					unsigned int freq, void *buf)
> +{
> +	u32 ff = 0;
> +
> +	if (speed == USB_SPEED_FULL) {
> +		/*
> +		 * Full-speed feedback endpoints report frequency
> +		 * in samples/microframe
> +		 * Format is encoded in Q10.10 left-justified in the 24 bits,
> +		 * so that it has a Q10.14 format.
> +		 */
> +		ff = DIV_ROUND_UP((freq << 14), 1000);
> +	} else {
> +		/*
> +		 * High-speed feedback endpoints report frequency
> +		 * in samples/microframe.
> +		 * Format is encoded in Q12.13 fitted into four bytes so that
> +		 * the binary point is located between the second and the third
> +		 * byte fromat (that is Q16.16)
> +		 *
> +		 * Prevent integer overflow by calculating in Q12.13 fromat and
> +		 * then shifting to Q16.16
> +		 */
> +		ff = DIV_ROUND_UP((freq << 13), (8*1000)) << 3;
> +	}
> +	*(__le32 *)buf = cpu_to_le32(ff);
> +}
> +
>  static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
>  {
>  	unsigned int pending;
> @@ -182,6 +215,36 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
>  		dev_err(uac->card->dev, "%d Error!\n", __LINE__);
>  }
>  
> +static void u_audio_iso_fback_complete(struct usb_ep *ep,
> +				       struct usb_request *req)
> +{
> +	struct uac_rtd_params *prm = req->context;
> +	struct snd_uac_chip *uac = prm->uac;
> +	struct g_audio *audio_dev = uac->audio_dev;
> +	int status = req->status;
> +	unsigned long flags;
> +
> +	/* i/f shutting down */
> +	if (!prm->fb_ep_enabled || req->status == -ESHUTDOWN)
> +		return;
> +
> +	/*
> +	 * We can't really do much about bad xfers.
> +	 * Afterall, the ISOCH xfers could fail legitimately.
> +	 */
> +	if (status)
> +		pr_debug("%s: iso_complete status(%d) %d/%d\n",
> +			__func__, status, req->actual, req->length);
> +
> +	spin_lock_irqsave(&prm->lock, flags);
> +	u_audio_set_fback_frequency(audio_dev->gadget->speed,
> +				    prm->ffback, req->buf);
> +	spin_unlock_irqrestore(&prm->lock, flags);
> +
> +	if (usb_ep_queue(ep, req, GFP_ATOMIC))
> +		dev_err(uac->card->dev, "%d Error!\n", __LINE__);
> +}
> +
>  static int uac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
>  {
>  	struct snd_uac_chip *uac = snd_pcm_substream_chip(substream);
> @@ -346,14 +409,33 @@ static inline void free_ep(struct uac_rtd_params *prm, struct usb_ep *ep)
>  		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
>  }
>  
> +static inline void free_ep_fback(struct uac_rtd_params *prm, struct usb_ep *ep)
> +{
> +	struct snd_uac_chip *uac = prm->uac;
> +
> +	if (!prm->fb_ep_enabled)
> +		return;
> +
> +	prm->fb_ep_enabled = false;
> +
> +	if (prm->req_fback) {
> +		usb_ep_dequeue(ep, prm->req_fback);
> +		kfree(prm->req_fback->buf);

You may need to free buf at completion, Jack Pham found a use-after-free
bug at dwc3 controller due to async execution for usb_ep_dequeue.

https://www.spinics.net/lists/linux-usb/msg203782.html

> +		usb_ep_free_request(ep, prm->req_fback);
> +		prm->req_fback = NULL;
> +	}
> +
> +	if (usb_ep_disable(ep))
> +		dev_err(uac->card->dev, "%s:%d Error!\n", __func__, __LINE__);
> +}
>  
>  int u_audio_start_capture(struct g_audio *audio_dev)
>  {
>  	struct snd_uac_chip *uac = audio_dev->uac;
>  	struct usb_gadget *gadget = audio_dev->gadget;
>  	struct device *dev = &gadget->dev;
> -	struct usb_request *req;
> -	struct usb_ep *ep;
> +	struct usb_request *req, *req_fback;
> +	struct usb_ep *ep, *ep_fback;
>  	struct uac_rtd_params *prm;
>  	struct uac_params *params = &audio_dev->params;
>  	int req_len, i;
> @@ -386,6 +468,42 @@ int u_audio_start_capture(struct g_audio *audio_dev)
>  			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
>  	}
>  
> +	ep_fback = audio_dev->in_ep_fback;
> +	if (!ep_fback)
> +		return 0;
> +
> +	/* Setup feedback endpoint */
> +	config_ep_by_speed(gadget, &audio_dev->func, ep_fback);
> +	prm->fb_ep_enabled = true;
> +	usb_ep_enable(ep_fback);
> +	req_len = ep_fback->maxpacket;
> +
> +	req_fback = usb_ep_alloc_request(ep_fback, GFP_ATOMIC);
> +	if (req_fback == NULL)
> +		return -ENOMEM;
> +
> +	prm->req_fback = req_fback;
> +	req_fback->zero = 0;
> +	req_fback->context = prm;
> +	req_fback->length = req_len;
> +	req_fback->complete = u_audio_iso_fback_complete;
> +
> +	req_fback->buf = kzalloc(req_len, GFP_ATOMIC);
> +	if (!req_fback->buf)
> +		return -ENOMEM;
> +
> +	/*
> +	 * Configure the feedback endpoint's reported frequency.
> +	 * Always start with original frequency since its deviation can't
> +	 * be meauserd at start of playback

%s/meauserd/measured

> +	 */
> +	prm->ffback = params->c_srate;
> +	u_audio_set_fback_frequency(audio_dev->gadget->speed,
> +				    prm->ffback, req_fback->buf);
> +
> +	if (usb_ep_queue(ep_fback, req_fback, GFP_ATOMIC))
> +		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(u_audio_start_capture);
> @@ -394,6 +512,8 @@ void u_audio_stop_capture(struct g_audio *audio_dev)
>  {
>  	struct snd_uac_chip *uac = audio_dev->uac;
>  
> +	if (audio_dev->in_ep_fback)
> +		free_ep_fback(&uac->c_prm, audio_dev->in_ep_fback);
>  	free_ep(&uac->c_prm, audio_dev->out_ep);
>  }
>  EXPORT_SYMBOL_GPL(u_audio_stop_capture);
> diff --git a/drivers/usb/gadget/function/u_audio.h b/drivers/usb/gadget/function/u_audio.h
> index 5ea6b86..53e6baf 100644
> --- a/drivers/usb/gadget/function/u_audio.h
> +++ b/drivers/usb/gadget/function/u_audio.h
> @@ -30,7 +30,10 @@ struct g_audio {
>  	struct usb_gadget *gadget;
>  
>  	struct usb_ep *in_ep;
> +
>  	struct usb_ep *out_ep;
> +	/* feedback IN endpoint corresponding to out_ep */
> +	struct usb_ep *in_ep_fback;
>  
>  	/* Max packet size for all in_ep possible speeds */
>  	unsigned int in_ep_maxpsize;
> -- 
> 1.9.1
> 

-- 

Thanks,
Peter Chen



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux