On Wed, Nov 11, 2020 at 12:08:45PM +0300, Serge Semin wrote: > DWC USB3 DT node is supposed to be compliant with the Generic xHCI > Controller schema, but with additional vendor-specific properties, the > controller-specific reference clocks and PHYs. So let's convert the > currently available legacy text-based DWC USB3 bindings to the DT schema > and make sure the DWC USB3 nodes are also validated against the > usb-xhci.yaml schema. > > Note we have to discard the nodename restriction of being prefixed with > "dwc3@" string, since in accordance with the usb-hcd.yaml schema USB nodes > are supposed to be named as "^usb(@.*)". > > Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> > > --- > > Changelog v2: > - Discard '|' from the descriptions, since we don't need to preserve > the text formatting in any of them. > - Drop quotes from around the string constants. > - Fix the "clock-names" prop description to be referring the enumerated > clock-names instead of the ones from the Databook. > > Changelog v3: > - Apply usb-xhci.yaml# schema only if the controller is supposed to work > as either host or otg. > > Changelog v4: > - Apply usb-drd.yaml schema first. If the controller is configured > to work in a gadget mode only, then apply the usb.yaml schema too, > otherwise apply the usb-xhci.yaml schema. > - Discard the Rob'es Reviewed-by tag. Please review the patch one more > time. > --- > .../devicetree/bindings/usb/dwc3.txt | 125 -------- > .../devicetree/bindings/usb/snps,dwc3.yaml | 303 ++++++++++++++++++ > 2 files changed, 303 insertions(+), 125 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/usb/dwc3.txt > create mode 100644 Documentation/devicetree/bindings/usb/snps,dwc3.yaml > > diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt > deleted file mode 100644 > index d03edf9d3935..000000000000 > --- a/Documentation/devicetree/bindings/usb/dwc3.txt > +++ /dev/null > @@ -1,125 +0,0 @@ > -synopsys DWC3 CORE > - > -DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties > - as described in 'usb/generic.txt' > - > -Required properties: > - - compatible: must be "snps,dwc3" > - - reg : Address and length of the register set for the device > - - interrupts: Interrupts used by the dwc3 controller. > - - clock-names: list of clock names. Ideally should be "ref", > - "bus_early", "suspend" but may be less or more. > - - clocks: list of phandle and clock specifier pairs corresponding to > - entries in the clock-names property. > - > -Exception for clocks: > - clocks are optional if the parent node (i.e. glue-layer) is compatible to > - one of the following: > - "cavium,octeon-7130-usb-uctl" > - "qcom,dwc3" > - "samsung,exynos5250-dwusb3" > - "samsung,exynos5433-dwusb3" > - "samsung,exynos7-dwusb3" > - "sprd,sc9860-dwc3" > - "st,stih407-dwc3" > - "ti,am437x-dwc3" > - "ti,dwc3" > - "ti,keystone-dwc3" > - "rockchip,rk3399-dwc3" > - "xlnx,zynqmp-dwc3" What happened with this part of dtschema? It sees you removed it. Best regards, Krzysztof
