Re: [PATCH v1 11/30] drm/tegra: dc: Support OPP and SoC core voltage scaling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



10.11.2020 23:32, Mark Brown пишет:
> On Tue, Nov 10, 2020 at 09:29:45PM +0100, Thierry Reding wrote:
>> On Thu, Nov 05, 2020 at 02:44:08AM +0300, Dmitry Osipenko wrote:
> 
>>> +	/*
>>> +	 * Voltage scaling is optional and trying to set voltage for a dummy
>>> +	 * regulator will error out.
>>> +	 */
>>> +	if (!device_property_present(dc->dev, "core-supply"))
>>> +		return;
> 
>> This is a potentially heavy operation, so I think we should avoid that
>> here. How about you use devm_regulator_get_optional() in ->probe()? That
>> returns -ENODEV if no regulator was specified, in which case you can set
>> dc->core_reg = NULL and use that as the condition here.
> 
> Or enumerate the configurable voltages after getting the regulator and
> handle that appropriately which would be more robust in case there's
> missing or unusual constraints.
> 

I already changed that code to use regulator_get_optional() for v2.

Regarding the enumerating supported voltage.. I think this should be
done by the OPP core, but regulator core doesn't work well if
regulator_get() is invoked more than one time for the same device, at
least there is a loud debugfs warning about an already existing
directory for a regulator. It's easy to check whether the debug
directory exists before creating it, like thermal framework does it for
example, but then there were some other more difficult issues.. I don't
recall what they were right now. Perhaps will be easier to simply get a
error from regulator_set_voltage() for now because it shouldn't ever
happen in practice, unless device-tree has wrong constraints.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux