It would appear that there are an awful lot of Seagate USB3-SATA controllers out that don't get on too well with uas :( (LaCie is owned by Seagate). David -----Original Message----- From: David C. Partridge [mailto:david.partridge@xxxxxxxxxxxxx] Sent: 09 November 2020 15:21 To: 'Oliver Neukum'; linux-usb@xxxxxxxxxxxxxxx Subject: RE: Issues with LaCie USB3 drive and UAS Update: I found out how to do it! Created /etc/modprobe.d/blacklist_uas.conf containing text: options usb-storage quirks=059f:105f:u followed by: update-initramfs -u and rebooted. Now the device works fine and mkfs.ext4 finishes in seconds rather than hours. David -----Original Message----- From: David C. Partridge [mailto:david.partridge@xxxxxxxxxxxxx] Sent: 09 November 2020 11:21 To: 'Oliver Neukum'; linux-usb@xxxxxxxxxxxxxxx Subject: RE: Issues with LaCie USB3 drive and UAS Please could I ask you to provide detailed instructions on how to blacklist UAS for just this device? Thanks Daivd -----Original Message----- From: Oliver Neukum [mailto:oneukum@xxxxxxxx] Sent: 09 November 2020 10:14 To: David C. Partridge; linux-usb@xxxxxxxxxxxxxxx Subject: Re: Issues with LaCie USB3 drive and UAS Am Montag, den 09.11.2020, 09:51 +0000 schrieb David C. Partridge: > I'm sure you are right in your diagnosis (absent any knowledge to the contrary). It is a guess, merely. Based on long woefull experience with the quality of some hardware. > Now what's the treatment? Use WRITE, not WRITE SAME. That is a task of the SCSI layer, not UAS. > Would uas black-list provide a work-araound? If so a detailed recipe will be needed by me ... Indirectly. The storage driver sets no_write_same. UAS does not. It looks like UAS will need a kernel patch for that. > Fix to the code? Ideal, but takes lots longer, so a work-around may be needed for a while Very well. For experimentation, please try blacklisting UAS. If that fails I have guessed wrong. If it works, I will make a test patch. Regards Oliver
