Hi,
Op 28-10-2020 om 10:18 schreef Felipe Balbi:
Hi,
Ferry Toth <fntoth@xxxxxxxxx> writes:
Op 27-10-2020 om 22:16 schreef Andy Shevchenko:
On Tue, Oct 27, 2020 at 10:13 PM Ferry Toth <fntoth@xxxxxxxxx> wrote:
Op 22-10-2020 om 15:43 schreef Andy Shevchenko:
On Thu, Oct 22, 2020 at 4:21 PM Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> wrote:
Ferry Toth wrote:
...
There are some fixes to dwc3 in kernel mainline. Is it possible to test
this against linux-next?
I think the best is to wait for v5.10-rc1 and retest.
Can you give a try of v5.10-rc1?
Yes, I just tried:
I booted in host mode, then flip the switch. Gadget come up, go down
once, then come up again and stay up.
please collect trace events. It's important to figure out why it's going
down, even if only once. Make sure to collect trace *and* dmesg so we
can correlate trace with the reenumeration that should show up in dmesg.
thanks
Sorry, I had to replace mobo. Now back on this.
As is, on Edison I can record with something like "perf record -e
'dwc3:dwc3_gadget*' -e 'gadget:*' -g -a".
Then get the trace buffer with "perf script > gadget.txt". Then at each
trace point we get a stack trace like:
file-storage 831 [001] 4445.240038: dwc3:dwc3_gadget_ep_cmd: [FAILED
TO PARSE] name=ep4in cmd=524295 param0=0 param1=0 param2=0 cmd_status=0
ffffffff9a35b7e7 __traceiter_dwc3_gadget_ep_cmd+0x37
([kernel.kallsyms])
ffffffff9a35b7e7 __traceiter_dwc3_gadget_ep_cmd+0x37
([kernel.kallsyms])
ffffffff9a35fa40 dwc3_send_gadget_ep_cmd+0x320 ([kernel.kallsyms])
ffffffff9a3606d0 __dwc3_gadget_kick_transfer+0x200 ([kernel.kallsyms])
ffffffff9a361114 dwc3_gadget_ep_queue+0xe4 ([kernel.kallsyms])
ffffffff9a3afc3a usb_ep_queue+0x2a ([kernel.kallsyms])
ffffffffc047c301 start_transfer.isra.0+0x21 ([kernel.kallsyms])
ffffffffc047c88a start_in_transfer.isra.0+0x3a ([kernel.kallsyms])
ffffffffc047c93d send_status+0x8d ([kernel.kallsyms])
ffffffffc047dd05 fsg_main_thread+0x3c5 ([kernel.kallsyms])
ffffffff99c853b9 kthread+0xf9 ([kernel.kallsyms])
ffffffff99c01a32 ret_from_fork+0x22 ([kernel.kallsyms])
"perf list" shows the tracepoint events, the same as under
/sys/kernel/debug/tracing/events/
Question is which points to trace (above command fills buffer to 35MB in
10sec). Do you have suggestions?
Thanks
