Re: strange call stack when running uvc-gadget application

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Peter,

On 11/4/2020 3:35 PM, Peter Chen wrote:
> On 20-11-03 11:50:17, Sriharsha Allenki wrote:
>> Hi Peter,
>>
>> On 11/2/2020 3:20 PM, Peter Chen wrote:
>>> Hi all,
>>>
>>> When running run uvc-gadget application at HS using dwc3 gadget at Linux
>>> v5.10-rc1, the video stream will be stopped after 1-2 minutes running. The
>>> trace log like below, I wonder how _raw_spin_lock_irqsave calls __switch_to?
>>> Any hints? Thanks.
>>>
>>> usb_test# [ 4757.322728] configfs-gadget gadget: uvc: VS request completed with status -18.
>>> [ 4757.329971] configfs-gadget gadget: uvc: VS request completed with status -18.
>>> UVC: Possible USB shutdown requested from Host, seen during VIDIOC_DQBUF
>>>
>>> usb_test# [ 4812.376465] check_interval: 37 callbacks suppressed
>>> [ 4825.307665] configfs-gadget gadget: uvc: VS request completed with status -18.
>>> [ 4825.314912] configfs-gadget gadget: uvc: VS request completed with status -18.
>>> UVC: Possible USB shutdown requested from Host, seen during VIDIOC_DQBUF
>>> [ 4826.231392] check_interval: 3 callbacks suppressed
>>> select timeout
>>> [ 4827.336088] dwc3 38100000.dwc3: request 0000000080ebefd3 was not queued to ep2in
>>> [ 4827.343547] dwc3 38100000.dwc3: request 00000000b578605c was not queued to ep2in
>>> [ 4827.350989] dwc3 38100000.dwc3: request 00000000c6d191cd was not queued to ep2in
>>> [ 4827.358422] dwc3 38100000.dwc3: request 0000000085205409 was not queued to ep2in
>>> UVC: Stopping video stream.
>>>
>>> [ 4848.381718] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>>> [ 4848.387824] rcu:     3-...0: (1 GPs behind) idle=162/1/0x4000000000000000 softirq=10819/10819 fqs=2356
>>> [ 4848.396956]  (detected by 2, t=5252 jiffies, g=20129, q=3770)
>>> [ 4848.396959] Task dump for CPU 3:
>>> [ 4848.405925] task:uvc-gadget_wlhe state:R  running task     stack:    0 pid:  674 ppid:   636 flags:0x00000202
>>> [ 4848.415842] Call trace:
>>> [ 4848.418294]  __switch_to+0xc0/0x170
>>> [ 4848.421785]  _raw_spin_lock_irqsave+0x84/0xb0
>>> [ 4848.426143]  composite_disconnect+0x28/0x78
>>> [ 4848.430327]  configfs_composite_disconnect+0x68/0x70
>>> [ 4848.435290]  usb_gadget_disconnect+0x10c/0x128
>>> [ 4848.439733]  usb_gadget_deactivate+0xd4/0x108
>>> [ 4848.444089]  usb_function_deactivate+0x6c/0x80
>>> [ 4848.448534]  uvc_function_disconnect+0x20/0x58
>>> [ 4848.452976]  uvc_v4l2_release+0x30/0x88
>>> [ 4848.456812]  v4l2_release+0xbc/0xf0
>>> [ 4848.460301]  __fput+0x7c/0x230
>>> [ 4848.463353]  ____fput+0x14/0x20
>>> [ 4848.466495]  task_work_run+0x88/0x140
>>> [ 4848.470157]  do_notify_resume+0x240/0x6f0
>>> [ 4848.474166]  work_pending+0x8/0x200
>> The reason for this seems to be that the usb_gadget_deactivate is being called with
>> spinlock held from the usb_function_deactivate and the same lock is being used
>> in the composite_disconnect (&cdev->lock).
>>
>> This should be able to resolve it.
>>
>> diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
>> index 05b176c82cc5..5fced737e4ef 100644
>> --- a/drivers/usb/gadget/composite.c
>> +++ b/drivers/usb/gadget/composite.c
>> @@ -392,8 +392,11 @@ int usb_function_deactivate(struct usb_function *function)
>>
>>         spin_lock_irqsave(&cdev->lock, flags);
>>
>> -       if (cdev->deactivations == 0)
>> +       if (cdev->deactivations == 0) {
>> +               spin_unlock_irqrestore(&cdev->lock, flags);
>>                 status = usb_gadget_deactivate(cdev->gadget);
>> +               spin_lock_irqsave(&cdev->lock, flags);
>> +       }
>>         if (status == 0)
>>                 cdev->deactivations++;
>>
>> @@ -424,8 +427,11 @@ int usb_function_activate(struct usb_function *function)
>>                 status = -EINVAL;
>>         else {
>>                 cdev->deactivations--;
>> -               if (cdev->deactivations == 0)
>> +               if (cdev->deactivations == 0) {
>> +                       spin_unlock_irqrestore(&cdev->lock, flags);
>>                         status = usb_gadget_activate(cdev->gadget);
>> +                       spin_lock_irqsave(&cdev->lock, flags);
>> +               }
>>         }
>>
>>         spin_unlock_irqrestore(&cdev->lock, flags);
>>
> Thanks, Sriharsha. It fixed the kernel dump after video stream has
> stopped, I did not check the whole trace carefully, and not found this
> spin recursion issue. You could add my Tested-by for it. Meanwhile,
> this issue was reported before, and unlock at usb_function_activate
> could also fix the possible sleep at atomic context issue for dwc3.
>
> https://lore.kernel.org/linux-usb/20191115070122.GF30608@b29397-desktop/T/
Thanks for the testing and confirmation, will raise the patch soon.

Regards,
Sriharsha
>
-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux