The new usb_control_msg_send() nicely wraps usb_control_msg() with
proper error check. Hence use the wrapper instead of calling
usb_control_msg() directly.
Signed-off-by: Himadri Pandya <himadrispandya@xxxxxxxxx>
---
drivers/usb/serial/belkin_sa.c | 35 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 9bb123ab9bc9..a5ff55f48303 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -105,9 +105,10 @@ struct belkin_sa_private {
#define WDR_TIMEOUT 5000 /* default urb timeout */
/* assumes that struct usb_serial *serial is available */
-#define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
- (c), BELKIN_SA_SET_REQUEST_TYPE, \
- (v), 0, NULL, 0, WDR_TIMEOUT)
+#define BSA_USB_CMD(c, v) usb_control_msg_send(serial->dev, 0, (c), \
+ BELKIN_SA_SET_REQUEST_TYPE, \
+ (v), 0, NULL, 0, WDR_TIMEOUT, \
+ GFP_KERNEL)
static int belkin_sa_port_probe(struct usb_serial_port *port)
{
@@ -309,12 +310,11 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
/* reassert DTR and (maybe) RTS on transition from B0 */
if ((old_cflag & CBAUD) == B0) {
control_state |= (TIOCM_DTR|TIOCM_RTS);
- if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1))
dev_err(&port->dev, "Set DTR error\n");
/* don't set RTS if using hardware flow control */
if (!(old_cflag & CRTSCTS))
- if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
- , 1) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 1))
dev_err(&port->dev, "Set RTS error\n");
}
}
@@ -330,18 +330,18 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
/* Report the actual baud rate back to the caller */
tty_encode_baud_rate(tty, baud, baud);
- if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value))
dev_err(&port->dev, "Set baudrate error\n");
} else {
/* Disable flow control */
if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
- BELKIN_SA_FLOW_NONE) < 0)
+ BELKIN_SA_FLOW_NONE))
dev_err(&port->dev, "Disable flowcontrol error\n");
/* Drop RTS and DTR */
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0))
dev_err(&port->dev, "DTR LOW error\n");
- if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0))
dev_err(&port->dev, "RTS LOW error\n");
}
@@ -352,7 +352,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
: BELKIN_SA_PARITY_EVEN;
else
urb_value = BELKIN_SA_PARITY_NONE;
- if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value))
dev_err(&port->dev, "Set parity error\n");
}
@@ -377,7 +377,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
urb_value = BELKIN_SA_DATA_BITS(8);
break;
}
- if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value))
dev_err(&port->dev, "Set data bits error\n");
}
@@ -385,8 +385,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2)
: BELKIN_SA_STOP_BITS(1);
- if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
- urb_value) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST, urb_value))
dev_err(&port->dev, "Set stop bits error\n");
}
@@ -407,7 +406,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
if (bad_flow_control)
urb_value &= ~(BELKIN_SA_FLOW_IRTS);
- if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value))
dev_err(&port->dev, "Set flow control error\n");
}
@@ -422,7 +421,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
- if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
+ if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0))
dev_err(&port->dev, "Set break_ctl %d\n", break_state);
}
@@ -476,13 +475,13 @@ static int belkin_sa_tiocmset(struct tty_struct *tty,
spin_unlock_irqrestore(&priv->lock, flags);
retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
- if (retval < 0) {
+ if (retval) {
dev_err(&port->dev, "Set RTS error %d\n", retval);
goto exit;
}
retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
- if (retval < 0) {
+ if (retval) {
dev_err(&port->dev, "Set DTR error %d\n", retval);
goto exit;
}
--
2.17.1
