Avoiding phy powerdown in host mode so that it can be woken up by devices.
Added hs_phy_mode flag to check connection status and set phy mode
and configure interrupts.
Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 14 +++-----------
drivers/usb/dwc3/core.h | 2 ++
2 files changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index bdf0925..0e4bc1e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1672,10 +1672,6 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
dwc3_core_exit(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
- if (!PMSG_IS_AUTO(msg)) {
- dwc3_core_exit(dwc);
- break;
- }
/* Let controller to suspend HSPHY before PHY driver suspends */
if (dwc->dis_u2_susphy_quirk ||
@@ -1733,13 +1729,9 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
spin_unlock_irqrestore(&dwc->lock, flags);
break;
case DWC3_GCTL_PRTCAP_HOST:
- if (!PMSG_IS_AUTO(msg)) {
- ret = dwc3_core_init_for_resume(dwc);
- if (ret)
- return ret;
- dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
- break;
- }
+
+ dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
+
/* Restore GUSB2PHYCFG bits that were modified in suspend */
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
if (dwc->dis_u2_susphy_quirk)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 74323b1..da63d4a3 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1101,6 +1101,8 @@ struct dwc3 {
bool phys_ready;
+ unsigned int hs_phy_mode;
+
struct ulpi *ulpi;
bool ulpi_ready;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
