Hi, Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx> writes: > On 10/11/2020 5:50 PM, Artur Petrosyan wrote: >> This patch set fixes/improves partial power down, hibernation power >> saving modes and adds support for host/device clock gating. >> >> Changes from V1: >> - Added new patches. >> 1. usb: dwc2: Add support for dwc2 host/device clock gating. >> 2. usb: dwc2: Add exit power saving mode before removing driver. >> 3. usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. >> >> - Updated patches >> 1. usb: dwc2: Fix/update enter/exit partial power down. >> - Updated the patch name from "usb: dwc2: Fix >> dwc2_restore_device_registers() function." to "usb: dwc2: >> Fix/update enter/exit partial power down." >> - Updated entering and exiting partial power down function >> flow. Before there was a lot of confusions with core >> entering to partial power down in device or host mode. >> - Added "rem_wakeup" for host exiting from Partial Power >> Down mode from host remote wakeup flow. According to >> programming guide in host mode, port power must be >> turned on when wakeup is detected. >> - Added "in_ppd" flag to indicate the core state after >> entering into Partial Power Down mode. >> 2. usb: dwc2: Fix wakeup detected and session request interrupt handlers. >> - According to programming guide added partial power >> down exit flow in wakeup detected interrupt handler. >> - Added clock gating exit flow from wakeup detected >> and session request interrupt handlers. >> 3. usb: dwc2: Fix suspend state in host mode for partial power down. >> - Added "dwc2_port_suspend" and "dwc2_port_resume" functions to >> "core.h" header file >> - Updated "USB_PORT_FEAT_RESET" flow when core receives port >> reset in Partial Power Down or Hibernation state. >> - Added return "-ENODEV" if core is in suspend state >> in "_dwc2_hcd_urb_enqueue" function to avoid port >> reset issue, when an external hub is connected. >> 4. usb: dwc2: Add part. power down exit from dwc2_conn_id_status_change(). >> - Instead of clearing registers inline for exiting partial power down >> mode, now calling the "dwc2_exit_partial_power_down" function without >> restoring the backup registers. >> 5. usb: dwc2: Update dwc2_handle_usb_suspend_intr function. >> - Added changes suggested by Douglas Anderson from commit >> "usb: dwc2: Get rid of useless error checks for >> hibernation/partial power down" >> 6. usb: dwc2: Fix hibernation between host and device modes. >> - Added setting of "hsotg->bus_suspended" flag to 0 because before if >> core exited from "GPWRDN_STS_CHGINT" interrupt in host mode the flag >> remained true not letting enter to hibernation next time. >> 7. usb: dwc2: Clear fifo_map when resetting core. >> - Added "static inline void dwc2_clear_fifo_map()" helper >> function to clear fifo_map with peripheral or dual role mode. >> - Added a dummy version of "dwc2_clear_fifo_map()" helper >> for host-only mode. >> 8. usb: dwc2: Add power saving mode support from system issued suspend/resume. >> - Updated the patch name from "usb: dwc2: Add enter/exit hibernation >> from system scheduled suspend" to "usb: dwc2: Add power saving mode >> support from system issued suspend/resume." >> - Fixed issue related to "spinlock already unlocked" reported by Doug >> Anderson. >> >> - Abandoned patches. >> 1. usb: dwc2: Add port conn. sts. checking in _dwc2_hcd_resume() function. >> - The changes of this patch are moved to the "usb: dwc2: Add power >> saving mode support from system issued suspend/resume" patch. >> 2. usb: dwc2: Add flag and debug messages for Partial Power Down mode. >> - The changes of this patch are moved to the "usb: dwc2: Fix/update >> enter/exit partial power down." patch. >> >> >> Artur Petrosyan (15): >> usb: dwc2: Fix/update enter/exit partial power down. >> usb: dwc2: Add support for dwc2 host/device clock gating. >> usb: dwc2: Fix wakeup detected and session request interrupt handlers. >> usb: dwc2: Fix suspend state in host mode for partial power down. >> usb: dwc2: Add part. power down exit from >> dwc2_conn_id_status_change(). >> usb: dwc2: Reset DEVADDR after exiting gadget hibernation. >> usb: dwc2: Add default param to control power optimization. >> usb: dwc2: Update dwc2_handle_usb_suspend_intr function. >> usb: dwc2: Fix hibernation between host and device modes. >> usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board. >> usb: dwc2: Allow exiting hibernation from gpwrdn rst detect >> usb: dwc2: Clear fifo_map when resetting core. >> usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated. >> usb: dwc2: Add power saving mode support from system issued >> suspend/resume >> usb: dwc2: Add exit power saving mode before removing driver where are all the patches? I only got the cover letter. When resending, please collect Minas' acked-by. -- balbi
Attachment:
signature.asc
Description: PGP signature
