usb_parse_ss_endpoint_companion() was supposed to allocate a structure to
hold the SuperSpeed Endpoint Companion descriptor, and either copy the
values the device returned, or fill in default values if the device
descriptor did not include the companion descriptor.
However, the previous code would miss the last endpoint in a configuration
with no descriptors after it. Make usb_parse_endpoint() allocate the SS
endpoint companion descriptor and fill it with default values, even if
we've run out of buffer space in this configuration descriptor.
Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
---
drivers/usb/core/config.c | 48 +++++++++++++++++++++++++-------------------
1 files changed, 27 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 24dfb33..a16c538 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -80,38 +80,18 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
int max_tx;
int i;
- /* Allocate space for the SS endpoint companion descriptor */
- ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
- GFP_KERNEL);
- if (!ep->ss_ep_comp)
- return -ENOMEM;
desc = (struct usb_ss_ep_comp_descriptor *) buffer;
if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
" interface %d altsetting %d ep %d: "
"using minimum values\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
- ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
- ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
- ep->ss_ep_comp->desc.bMaxBurst = 0;
- /*
- * Leave bmAttributes as zero, which will mean no streams for
- * bulk, and isoc won't support multiple bursts of packets.
- * With bursts of only one packet, and a Mult of 1, the max
- * amount of data moved per endpoint service interval is one
- * packet.
- */
- if (usb_endpoint_xfer_isoc(&ep->desc) ||
- usb_endpoint_xfer_int(&ep->desc))
- ep->ss_ep_comp->desc.wBytesPerInterval =
- ep->desc.wMaxPacketSize;
/*
* The next descriptor is for an Endpoint or Interface,
* no extra descriptors to copy into the companion structure,
* and we didn't eat up any of the buffer.
*/
- retval = 0;
- goto valid;
+ return 0;
}
memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
desc = &ep->ss_ep_comp->desc;
@@ -320,6 +300,28 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
buffer += i;
size -= i;
+ /* Allocate space for the SS endpoint companion descriptor */
+ endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+ GFP_KERNEL);
+ if (!endpoint->ss_ep_comp)
+ return -ENOMEM;
+
+ /* Fill in some default values (may be overwritten later) */
+ endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+ endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+ endpoint->ss_ep_comp->desc.bMaxBurst = 0;
+ /*
+ * Leave bmAttributes as zero, which will mean no streams for
+ * bulk, and isoc won't support multiple bursts of packets.
+ * With bursts of only one packet, and a Mult of 1, the max
+ * amount of data moved per endpoint service interval is one
+ * packet.
+ */
+ if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
+ usb_endpoint_xfer_int(&endpoint->desc))
+ endpoint->ss_ep_comp->desc.wBytesPerInterval =
+ endpoint->desc.wMaxPacketSize;
+
if (size > 0) {
retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
inum, asnum, endpoint, num_ep, buffer,
@@ -329,6 +331,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
retval = buffer - buffer0;
}
} else {
+ dev_warn(ddev, "config %d interface %d altsetting %d "
+ "endpoint 0x%X has no "
+ "SuperSpeed companion descriptor\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
retval = buffer - buffer0;
}
} else {
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
