In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named despite of the warning comment about possible backward compatibility issues. Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++-- arch/arm64/boot/dts/apm/apm-storm.dtsi | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 3feb1881bbc2..a0a194b8db7a 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -597,8 +597,8 @@ serial0: serial@10600000 { interrupts = <0x0 0x4c 0x4>; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x19000000 0x0 0x100000>; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index 8c802d87e751..f5083b3b9579 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -923,8 +923,8 @@ sata3: sata@1a800000 { phy-names = "sata-phy"; }; - /* Do not change dwusb name, coded for backward compatibility */ - usb0: dwusb@19000000 { + /* Node-name might need to be coded as dwusb for backward compatibility */ + usb0: usb@19000000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x19000000 0x0 0x100000>; @@ -933,7 +933,7 @@ usb0: dwusb@19000000 { dr_mode = "host"; }; - usb1: dwusb@19800000 { + usb1: usb@19800000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x19800000 0x0 0x100000>; -- 2.27.0