Commit a4e7279cd1d1 ("cdc-acm: introduce a cool down") is causing
regression if there is some USB error, such as -EPROTO.
This has been reported on some samples of the Odroid-N2 using the Combee II
Zibgee USB dongle.
> struct acm *acm = container_of(work, struct acm, work)
is incorrect in case of a delayed work and causes warnings, usually from
the workqueue:
> WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:1474 __queue_work+0x480/0x528.
When this happens, USB eventually stops working completely after a while.
Also the ACM_ERROR_DELAY bit is never set, so the cooldown mechanism
previously introduced cannot be triggered and acm_submit_read_urb() is
never called.
This changes makes the cdc-acm driver use a single delayed work, fixing the
pointer arithmetic in acm_softint() and set the ACM_ERROR_DELAY when the
cooldown mechanism appear to be needed.
Fixes: a4e7279cd1d1 ("cdc-acm: introduce a cool down")
Reported-by: Pascal Vizeli <pascal.vizeli@xxxxxxxxxxxx>
Cc: Oliver Neukum <oneukum@xxxxxxxx>
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
Hi,
I tried to fix problem introduced by
commit a4e7279cd1d1 ("cdc-acm: introduce a cool down") while keeping the
original intent, or at least what I understand of it.
A plain revert of the original commit also works for me.
drivers/usb/class/cdc-acm.c | 12 +++++-------
drivers/usb/class/cdc-acm.h | 3 +--
2 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f1a9043bdfe5..172cd2d21914 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -507,6 +507,7 @@ static void acm_read_bulk_callback(struct urb *urb)
"%s - cooling babbling device\n", __func__);
usb_mark_last_busy(acm->dev);
set_bit(rb->index, &acm->urbs_in_error_delay);
+ set_bit(ACM_ERROR_DELAY, &acm->flags);
cooldown = true;
break;
default:
@@ -532,7 +533,7 @@ static void acm_read_bulk_callback(struct urb *urb)
if (stopped || stalled || cooldown) {
if (stalled)
- schedule_work(&acm->work);
+ schedule_delayed_work(&acm->dwork, 0);
else if (cooldown)
schedule_delayed_work(&acm->dwork, HZ / 2);
return;
@@ -562,13 +563,13 @@ static void acm_write_bulk(struct urb *urb)
acm_write_done(acm, wb);
spin_unlock_irqrestore(&acm->write_lock, flags);
set_bit(EVENT_TTY_WAKEUP, &acm->flags);
- schedule_work(&acm->work);
+ schedule_delayed_work(&acm->dwork, 0);
}
static void acm_softint(struct work_struct *work)
{
int i;
- struct acm *acm = container_of(work, struct acm, work);
+ struct acm *acm = container_of(work, struct acm, dwork.work);
if (test_bit(EVENT_RX_STALL, &acm->flags)) {
smp_mb(); /* against acm_suspend() */
@@ -584,7 +585,7 @@ static void acm_softint(struct work_struct *work)
if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
for (i = 0; i < acm->rx_buflimit; i++)
if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
- acm_submit_read_urb(acm, i, GFP_NOIO);
+ acm_submit_read_urb(acm, i, GFP_KERNEL);
}
if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
@@ -1352,7 +1353,6 @@ static int acm_probe(struct usb_interface *intf,
acm->ctrlsize = ctrlsize;
acm->readsize = readsize;
acm->rx_buflimit = num_rx_buf;
- INIT_WORK(&acm->work, acm_softint);
INIT_DELAYED_WORK(&acm->dwork, acm_softint);
init_waitqueue_head(&acm->wioctl);
spin_lock_init(&acm->write_lock);
@@ -1562,7 +1562,6 @@ static void acm_disconnect(struct usb_interface *intf)
}
acm_kill_urbs(acm);
- cancel_work_sync(&acm->work);
cancel_delayed_work_sync(&acm->dwork);
tty_unregister_device(acm_tty_driver, acm->minor);
@@ -1605,7 +1604,6 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
return 0;
acm_kill_urbs(acm);
- cancel_work_sync(&acm->work);
cancel_delayed_work_sync(&acm->dwork);
acm->urbs_in_error_delay = 0;
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index cd5e9d8ab237..b95ff769072e 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -112,8 +112,7 @@ struct acm {
# define ACM_ERROR_DELAY 3
unsigned long urbs_in_error_delay; /* these need to be restarted after a delay */
struct usb_cdc_line_coding line; /* bits, stop, parity */
- struct work_struct work; /* work queue entry for various purposes*/
- struct delayed_work dwork; /* for cool downs needed in error recovery */
+ struct delayed_work dwork; /* work queue entry for various purposes */
unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */
unsigned int ctrlout; /* output control lines (DTR, RTS) */
struct async_icount iocount; /* counters for control line changes */
--
2.25.4
